Wine 1.1.30 + winetricks +color setter +goodies ...pet & sfs

Message

technosaurus · #1 Post by **technosaurus** » Sun 18 Jan 2009, 06:12

Update- See my later posts for previous versions in case there was a regression

Latest pet
http://puppylinux.asia/members/T/486_pe ... 8-i486.pet
wine_lite-1.1.30

Latest pxt (for puppy 4.3 with pxtget patch)
http://www.puppylinux.asia/members/T/44 ... 0-i486.pxt
(adds openAL and mpg123)

dependencies (& other packages)
http://puppylinux.asia/members/T/486_pet/ & ftp://distro.ibiblio.org/pub/linux/dist ... packages-4
http://www.puppylinux.asia/members/T/444/
http://puppylinux.asia/members/T/ ... now pw protected by "puppy", "linux"

These work pretty well: Portable Apps

vovchik · #2 Post by **vovchik** » Sun 18 Jan 2009, 12:13

Dear technosaurus,

Thanks for the new Wine (1.1.13) pet. I installed it on 3.01 and it works fine. Earlier, I had installed the Suse 10.3 rpm of the same and it also worked. Suse has only one advantage, in my view, in that Jack support is compiled in. I use Finale and Overture for composition (win progs) and like to have Jack available. Perhaps you could include Jack in your next compile - I would be grateful.

With kind regards,
vovchik

technosaurus · #3 Post by **technosaurus** » Sun 18 Jan 2009, 20:05

Placeholder

mikeb · #4 Post by **mikeb** » Fri 30 Jan 2009, 01:51

Working ok in standard puppy 4.12

...thanks.

No winecfg in there? but has menu entry...

There are a surprising number of programs out there still needing win16 so maybe leave that as is.

regards

mike

technosaurus · #5 Post by **technosaurus** » Mon 02 Feb 2009, 03:52

updated to wine 1.1.14 - 13.0 MB
http://www.puppylinux.asia/members/T/48 ... 4-i486.pet

Here are the (not required) helper packages that I compiled against
http://www.puppylinux.asia/members/T/48 ... ct-1.2.pet
http://www.puppylinux.asia/members/T/48 ... 1-i486.pet
http://www.puppylinux.asia/members/T/48 ... 1-i486.pet
http://www.puppylinux.asia/members/T/48 ... 3-i486.pet
ftp://distro.ibiblio.org/pub/linux/dist ... ri-7.3.pet

As usual I have made a minimal version - 12.4 MB ()
http://www.puppylinux.asia/members/T/48 ... 4-i486.pet

And an all inclusive .sfs -19,2 MB (has all helper apps included)
http://www.puppylinux.asia/members/T/ap ... 14_412.sfs

I don't use the helper packages above for anything so I can't be sure that they all work for all purposes (I am thinking that esound and jack may need to be compiled with --prefix=/ )

Notes: the sfs is already set up to use ALSA and JACK and has /mnt/home/ set up as drive D:/ (useful for PortableApps on a usbstick)

This time I compiled with support for GL, GLU, Xcomposite, JACK, esound, LDAP, ... still no hal, capi or gnutls - maybe in 1.1.15 if they are needed?

mikeb · #6 Post by **mikeb** » Mon 02 Feb 2009, 14:52

No winecfg in there? but has menu entry..

used wincfg from older wine..worked fine as seems to be just a wrapper script....

all working nicely

mike

technosaurus · #7 Post by **technosaurus** » Mon 02 Feb 2009, 17:34

@mikeb - which version of 1.1.14 were you using? regular, lite or sfs?

mikeb · #8 Post by **mikeb** » Mon 02 Feb 2009, 18:20

it was the 1.1.13 ... downloaded it 3 days before you updated so probably irrelevent now

regards

mike

Leon · #9 Post by **Leon** » Mon 02 Feb 2009, 21:34

technosaurus wrote:updated to wine 1.1.14

technosaurus,
Thanks for the great work on Wine and for so many install options to choose from.

dawnsboy · #10 Post by **dawnsboy** » Tue 03 Feb 2009, 01:22

Technosaurus,

I downloaded the full version with the additional packages for dependencies and installed to my 4.12 Bare setup. Great work! Thank you for the details like menu entries for each of the items from winecfg to progman. I will have fun playing with this!

_MegadetH_ · #11 Post by **_MegadetH_** » Sun 08 Feb 2009, 10:25

hi there!

I downloaded Wine-1.1.14_412.sfs and I put it in root. After I selected Wine-1.1.14_412.sfs in BootManager. I rebooted, and I can't see Wine in menu. It seems It won't load. Please tell me if there's something wrong.

I'd like to play 3d games like quake arena that support opengl. Is it enough to load Wine-1.1.14_412.sfs to play 3d games or do I have to install other files? I already have installed xorgfulldrivesdri.

technosaurus · #12 Post by **technosaurus** » Tue 10 Feb 2009, 03:23

_MegadetH_

sorry for the long response time... I no longer had a default puppy 412 to test against. I just tested the sfs and it is working fine for me at least

Maybe this is the problem

I put it in root.

the sfs should go in /mnt/home

this would be the "root" of the drive that the frugal install is on not :
/
or
~/
or
/root/

anyhow thats what I thought it might be but I wanted to test it first

if that's not the case verify the md5 is 75da57d1b58176a86e079f8d0dcec5d7

a full install is a whole different story all together - this is when you would actually have to copy the contents of the sfs to / (aka root) - although there are more sophisticate ways available here - that's the quick and dirty method I use for older systems that I do full installs on[/quote]

technosaurus · #13 Post by **technosaurus** » Tue 10 Feb 2009, 06:10

here is an addon to give you menu entries for all of the GUI programs and command line access to wine command line tools + wine tricks to download "free" helper apps

_MegadetH_ · #14 Post by **_MegadetH_** » Wed 11 Feb 2009, 20:38

technosaurus wrote:_MegadetH_

sorry for the long response time... I no longer had a default puppy 412 to test against. I just tested the sfs and it is working fine for me at least

Maybe this is the problem
I put it in root.
the sfs should go in /mnt/home

this would be the "root" of the drive that the frugal install is on not :
/
or
~/
or
/root/

anyhow thats what I thought it might be but I wanted to test it first

if that's not the case verify the md5 is 75da57d1b58176a86e079f8d0dcec5d7

a full install is a whole different story all together - this is when you would actually have to copy the contents of the sfs to / (aka root) - although there are more sophisticate ways available here - that's the quick and dirty method I use for older systems that I do full installs on

[/quote]

thanks technosaurus but
I tried to move Wine-1.1.14_412.sfs into /mnt/home but I got the error in the attachment. Maybe it is because I've a full install and I don't know how to extract files from a .sfs to home.

technosaurus · #15 Post by **technosaurus** » Wed 11 Feb 2009, 21:59

This thread will show you how to mount an sfs with a full install (I don't necessarily recommend it in this scenario)
http://www.murga-linux.com/puppy/viewtopic.php?t=37475

My suggestion would be to:
A: install all of the .pets (this would allow you to uninstall)
B. copy the contents of the sfs to /
this is as simple as highlighting all of the folders in the mounted sfs (just click on it to mount it) and dragging them to / in another ROX window <--this will not allow you to uninstall thus I would only do this if you have limited bandwidth or for some other reason can't get the .pets

_MegadetH_ · #16 Post by **_MegadetH_** » Sat 14 Feb 2009, 18:41

Thanks technosaurus
I installed each pets above. It works to run little program but I had no success with 3d games. I tried even with older version, but I think I will never run a window game

mikeb · #17 Post by **mikeb** » Sat 14 Feb 2009, 19:55

This wine package I think does not have the open GL support enabled so you may need to try the other one available on the forum...if openGL is working for your card then wine will use it automatically.
I can play 3d games on wine with no problem,

regards

mike

technosaurus · #18 Post by **technosaurus** » Sat 14 Feb 2009, 21:48

the 1.14 release has support for opengl (it is compiled against everything wine supports include GL and GLU - however there is one gaming patch/hack that was not applied because it may? cause regressions in other places) - the 1.13 does not have support for anything that is not included in puppy & is slightly faster so I have left it up

It was actually a lot of work to get Xcomposite and GLU support - The devx and xorgDEV pet were missing a bunch of stuff so I had to download the whole 100mb dingo source archive and patch some pc files. I can upload a pet if anyone wants it as it should work for compiling other opengl programs too

As far as games many don't work out of the box (even if all the pieces/parts work)- check winehq.org to see the nuances for any particular game

edit: btw you may want to uninstall 1.13 and reinstall 1.14 to regain 3d support

mikeb · #19 Post by **mikeb** » Sat 14 Feb 2009, 22:21

Wot he said ^^^

One tip is that I found many games would only run properly if preceeded by a cd (call directory) to the programs folder as otherwise it could not find it's own files as launching from linux is not quite the same as launching in windows.

regards

mike

_MegadetH_ · #20 Post by **_MegadetH_** » Sun 15 Feb 2009, 10:38

technosaurus wrote:the 1.14 release has support for opengl (it is compiled against everything wine supports include GL and GLU - however there is one gaming patch/hack that was not applied because it may? cause regressions in other places) - the 1.13 does not have support for anything that is not included in puppy & is slightly faster so I have left it up

It was actually a lot of work to get Xcomposite and GLU support - The devx and xorgDEV pet were missing a bunch of stuff so I had to download the whole 100mb dingo source archive and patch some pc files. I can upload a pet if anyone wants it as it should work for compiling other opengl programs too

As far as games many don't work out of the box (even if all the pieces/parts work)- check winehq.org to see the nuances for any particular game

edit: btw you may want to uninstall 1.13 and reinstall 1.14 to regain 3d support

No, even 1.13 version didn't work for me with 3d games. I installed 1.14 because I though It could work for them.
When I run quake 3 I have this error:

Q3 1.11 win-x86 Nov 24 1999
----- FS_Startup -----
Current search path:
H:\\baseq3\pak0.pk3 (3539 files)
H:\/baseq3

----------------------
execing default.cfg
execing q3config.cfg
couldn't exec autoexec.cfg
...detecting CPU, found Intel Pentium III

------- Input Initialization -------
Initializing DirectInput...
Couldn't set DI coop level
Falling back to Win32 mouse support...
Joystick is not active.
------------------------------------
----- Client Initialization -----
----- Initializing Renderer ----
-------------------------------
----- Client Initialization Complete -----
--- Common Initialization Complete ---
Winsock Initialized
Opening IP socket: localhost:27960
Hostname: localhost
Alias: puppypc
IP: 127.12.34.56
Working directory: H:\
----- R_Init -----
Initializing OpenGL subsystem
...initializing QGL
...calling LoadLibrary( 'C:\windows\system32\opengl32.dll' ): succeeded
...setting mode 3: 640 480 FS
...using desktop display depth of 16
...calling CDS: ok
...registered window class
...created window@0,0 (640x480)
Initializing OpenGL driver
...getting DC: succeeded
...GLW_ChoosePFD( 16, 16, 0 )
...-1 PFDs found
...GLW_ChoosePFD failed
...GLW_ChoosePFD( 16, 16, 0 )
...-1 PFDs found
...GLW_ChoosePFD failed
...failed to find an appropriate PIXELFORMAT
...restoring display settings
...WARNING: could not set the given mode (3)
...setting mode 3: 640 480 FS
...using colorsbits of 16
...calling CDS: ok
...created window@0,0 (640x480)
Initializing OpenGL driver
...getting DC: succeeded
...GLW_ChoosePFD( 16, 16, 0 )
...-1 PFDs found
...GLW_ChoosePFD failed
...GLW_ChoosePFD( 16, 16, 0 )
...-1 PFDs found
...GLW_ChoosePFD failed
...failed to find an appropriate PIXELFORMAT
...restoring display settings
...WARNING: could not set the given mode (3)
...shutting down QGL
...unloading OpenGL DLL
...assuming '3dfxvgl' is a standalone driver
...initializing QGL
...WARNING: missing Glide installation, assuming no 3Dfx available
...shutting down QGL
----- CL_Shutdown -----
RE_Shutdown( 1 )
-----------------------
GLW_StartOpenGL() - could not load OpenGL subsystem

Do you think there's something wrong with opengl support?
Please tell me If I need to install something else.
Sorry for long post... I always tried to register to winehq forum but they never sent me the account activation mail.

(old)Puppy Linux Discussion Forum

(old)Puppy Linux Discussion Forum

Wine 1.1.30 + winetricks +color setter +goodies ...pet & sfs

Wine 1.1.30 + winetricks +color setter +goodies ...pet & sfs