Bionicpup64 8.0 CE

[Semme]

Should it not work out, speak up so we can move on to plan B.

[alibadrelsayed]

Semme, sorry but joiku doesn't work.

[alibadrelsayed]

I've a problem in my labtop charger, when I replace it I'll give you screen shots.

[Semme]

Hey, I've got a few questions here I need to know about and understand.

Does Bionic64 ship with this "huge-4.19.23-bionicpup64.tar.bz2" kernel?

If not, I should be able to swap it in as described by ozsouth here, correct?

And if this IS the case, would new kernel config and System.map files be created in /boot?

The goal here is to know whether these items have been included.

If not, how would I add them to the kernel build script?

Having had a looksee compile time on an average machine takes roughly between one and two hours.

Longer wouldn't be a stretch.

I'm guessing whomever built this kernel (that YOU Phil?) could easily provide me with what I'm asking for.


TIA

[Semme]

Top answer on the board? MD5 says YES!

Does Bionic64 ship with this "huge-4.19.23-bionicpup64.tar.bz2" kernel?

Now I know I'll need what's in the rest of my post above.

[gyro]

I've uploaded 'huge-4.19.128-gyro-64.tar.bz2' to http://www.mediafire.com/folder/21fyvbi4xglau/kernels, for Bionicpup64.

This kernel package does not contain any firmware, it requires the presence of an fdrv...sfs.

This kernel provides much improved support for mmc storage devices, based on BK's 'DOTconfig-5.4.12'.

gyro

[Semme]

gyro, this is just an alternate kernel offering, correct? It doesn't directly address the items I'm looking for here, right?

[gyro]

gyro, this is just an alternate kernel offering, correct? It doesn't directly address the items I'm looking for here, right?

Correct, the diffference between this and the release kernel, is that it's compiled from newer source, and that:

This kernel provides much improved support for mmc storage devices, based on BK's 'DOTconfig-5.4.12'.

gyro

[gyro]

I've uploaded 'huge-4.19.128-gyro-64.tar.bz2' to http://www.mediafire.com/folder/21fyvbi4xglau/kernels, for Bionicpup64.

The kernel with mmc storage support is now called 'huge-4.19.128-mmc-64.tar.bz2'.

gyro

[666philb]

I've uploaded 'huge-4.19.128-gyro-64.tar.bz2' to http://www.mediafire.com/folder/21fyvbi4xglau/kernels, for Bionicpup64.

The kernel with mmc storage support is now called 'huge-4.19.128-mmc-64.tar.bz2'.

gyro

hi gyro,

do you know what particular things need to be added in my DOTconfig for mmc storage support?

[gyro]

do you know what particular things need to be added in my DOTconfig for mmc storage support?

Try checking the following settings:

Code: Select all

CONFIG_MISC_RTSX=y

Code: Select all

CONFIG_MISC_RTSX_PCI=y
CONFIG_MISC_RTSX_USB=y

Code: Select all

CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PCI=y
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_ACPI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_F_SDH30=y
CONFIG_MMC_WBSD=y
CONFIG_MMC_TIFM_SD=y
CONFIG_MMC_SPI=y
CONFIG_MMC_SDRICOH_CS=m
CONFIG_MMC_CB710=y
CONFIG_MMC_VIA_SDMMC=y
CONFIG_MMC_VUB300=y
CONFIG_MMC_USHC=y
CONFIG_MMC_USDHI6ROL0=y
CONFIG_MMC_REALTEK_PCI=y
CONFIG_MMC_REALTEK_USB=y
CONFIG_MMC_CQHCI=y
CONFIG_MMC_TOSHIBA_PCI=y
CONFIG_MMC_MTK=y
CONFIG_MMC_SDHCI_XENON=y
CONFIG_MEMSTICK=y

To match what I have done in my series of "mmc" kernels.

gyro

[phat7]

Please change Geany's default DejaVu Sans. For editors a monospaced font is more appropriate.

[mikeslr]

Please change Geany's default DejaVu Sans. For editors a monospaced font is more appropriate.

Start Geany. From its Menu: Edit>Preferences. Click the Interface Panel. In the Fonts Section, Click the Button to the Right of Editor. It probably currently reads DejaVu Sans. In the GUI which opens there appear to be several monospaced fonts you can choose.

[phat7]

thanks mikeslr. I know how to change it. My suggestion is to ship bionicpub with a monospace font already set. A proportional font is not suitable for an editor.

[Lekium]

I would like to carry with me an USB pendrive with Bionic Pup, Freecad and Prusa Slicer.

Should I a) create a bootable USB pendrive with Rufus and generate a save file upon reboot or b) should I use this same USB pendrive to perform a full install to another pendrive to carry with me?

In any case I'd be using a 32Gb Kingston Datatraveller pen to be partitioned according to your advise.

I have been reading the Puppy wiki concerning it's structure and what gets booted to Ram and what gets saved. I've also been reading here about how to keep the save file small in size and having the choice to save it before powering down. I'd like to keep my puppy lean and snappy.

[Semme]

Lekium, however you proceed after my post, consider partitioning your stick as outlined here. For the opening FAT32 partition, you *should* need no more than 15mb or so over the size of your Bionic ISO.

Intrist'in >> https://www.prusa3d.com/prusaslicer/

[Lekium]

I have read that topic, I've learned that with Isobooter it's possible to have the save file in an ext4 partition, which should make for a faster saving time. However, after extracting the tar.gz, when clicking the isobooter file a text editor opens, I dont know how to get any further.

[rcrsn51]

@Lekium:

Are you working in Puppy or in Windows?

If you extract the .tar.gz in Puppy, you get an executable script. When you click on it, a terminal window opens with some yes/no questions.

If you are doing this in Puppy, right-click on the script and select Properties. Are the three Exec boxes checked?

[Lekium]

I made a mistake before. I'm now following the correct post, as i'm on ubuntu.

http://www.murga-linux.com/puppy/viewto ... 475#687475

However, now I get "command not found" after:

Code: Select all

sudo ./bootlace.com --time-out=0 /dev/sdb1

[rcrsn51]

I just tested this in xubuntu and it worked correctly.

Are you opening the terminal in the location where the file bootlace.com exists?

Use the "ls" command to check.