BionicPup32 (UPupBB) (27 June 2020)
JWM crashes
I am running both BionicPub64 and 32 and find that JWM crashes to a command screen when moving a window through Alt+F2 > Move or when selecting Move from the Window's drop-down menu.
I suspect this may be a known issue with JWM.
Is it ??
System log:
regards
proebler
I suspect this may be a known issue with JWM.
Is it ??
System log:
Code: Select all
May 8 10:58:14 puppypc28318 kern.info kernel: jwm[11096]: segfault at a0 ip 000055fb9bc6cb06 sp 00007fff580526a0 error 6 in jwm[55fb9bc4f000+36000]
proebler
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
-
- Posts: 159
- Joined: Sun 01 Mar 2020, 16:17
Re: JWM crashes
Cant't confirm this for bionic64.proebler wrote:I am running both BionicPub64 and 32 and find that JWM crashes to a command screen when moving a window through Alt+F2 > Move or when selecting Move from the Window's drop-down menu.
I suspect this may be a known issue with JWM.
Is it ??
System log:regardsCode: Select all
May 8 10:58:14 puppypc28318 kern.info kernel: jwm[11096]: segfault at a0 ip 000055fb9bc6cb06 sp 00007fff580526a0 error 6 in jwm[55fb9bc4f000+36000]
proebler
Though, I'm running my own WoofCE built using a real time kernel.
Our Future Is Not Set In Stone
[url]https://www.youtube.com/channel/UCyfyaxCNMduwyXlQFRQKhhQ[/url]
[url]https://soundcloud.com/user-633698367[/url]
[b]My own build of Bionic64[/b]
[url]https://www.youtube.com/channel/UCyfyaxCNMduwyXlQFRQKhhQ[/url]
[url]https://soundcloud.com/user-633698367[/url]
[b]My own build of Bionic64[/b]
- Sky Aisling
- Posts: 1368
- Joined: Sat 27 Jun 2009, 23:02
- Location: Port Townsend, WA. USA
BionicPup32 (UPupBB) (08 May 2020)
Hello peebee,
I just made a flash drive of Upupbb and I'm trying Upupbb out for the first time.
Is there a an adblocker for the 'light' browser.
'Light' browser is a scaled down version of Firefox?
Thank you for your timely response,
Sky
I just made a flash drive of Upupbb and I'm trying Upupbb out for the first time.
Is there a an adblocker for the 'light' browser.
'Light' browser is a scaled down version of Firefox?
Thank you for your timely response,
Sky
Re: BionicPup32 (UPupBB) (08 May 2020)
Light is a lightweight "starter for 10" browser based on [old] Mozilla code - if you need something more heavyweight / up-to-date use Internet -> Get Web browser to install your favourite.....Sky Aisling wrote:Is there a an adblocker for the 'light' browser.
'Light' browser is a scaled down version of Firefox?
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
- Sky Aisling
- Posts: 1368
- Joined: Sat 27 Jun 2009, 23:02
- Location: Port Townsend, WA. USA
BionicPup32 (UPupBB) (08 May 2020)
Hi peebee,
The 'Light' browser is good for me. I'd like to keep using it, but, is there a way to block the ads?
Sky
The 'Light' browser is good for me. I'd like to keep using it, but, is there a way to block the ads?
Sky
Re: BionicPup32 (UPupBB) (08 May 2020)
Sorry - don't know.... use the Pup-Advert-Blocker??Sky Aisling wrote:is there a way to block the ads?
Sky
There are some [old] add-ons modified for Light:
https://sourceforge.net/projects/lightf ... r%20Light/
and old Firefox add-ons might work.....
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
- perdido
- Posts: 1528
- Joined: Mon 09 Dec 2013, 16:29
- Location: ¿Altair IV , Just north of Eeyore Junction.?
Re: BionicPup32 (UPupBB) (08 May 2020)
Hi Sky,Sky Aisling wrote:Hi peebee,
The 'Light' browser is good for me. I'd like to keep using it, but, is there a way to block the ads?
Sky
I have light setup using ublock origin, noscript and https everywhere.
Keeps the ads away (pretty much)
I archived the extensions directory and a file (info.txt) with instructions. Its 4MB
If you want to try it http://ibm-pc.org/puppy/bionic/extensions.tar.xz
md5 0b821eee7bea002b15fbe7a031dda5ed
Ublock has a warning that it can't be verified that it is compatible but it works fine.
Noscript and https everywhere do not have any warnings.
If you try it and have questions you can post here or PM me.
Anybody else too.
- Sky Aisling
- Posts: 1368
- Joined: Sat 27 Jun 2009, 23:02
- Location: Port Townsend, WA. USA
BionicPup32 (UPupBB) (08 May 2020)
Thank you, Perdido, I'll take a look at Unblock Origin.
Sky
Sky
- Sky Aisling
- Posts: 1368
- Joined: Sat 27 Jun 2009, 23:02
- Location: Port Townsend, WA. USA
BionicPup32 (UPupBB) (08 May 2020)
Hello,
I am attempting to set the time in lower right tray to 12 hour time.
Pupclock set doesn't seem to be activating.
How to change time to 12 hour time?
EDIT: I found it.
I am attempting to set the time in lower right tray to 12 hour time.
Pupclock set doesn't seem to be activating.
How to change time to 12 hour time?
EDIT: I found it.
- Attachments
-
- Pupclockset.png
- (27.29 KiB) Downloaded 355 times
-
- Posts: 807
- Joined: Mon 12 Oct 2009, 17:11
I post here because this is the puppy I am using. peebee should know best.
I have an old broken laptop: For a width of 3 inches from top to bottom on the right, the pixels are dead. As a result, only a part of the notification tray at the bottom is visible.
Is there a file modification that could start the tray 3 inches to the left (facing screen) of where it now starts?
TIA for your assistance.
I have an old broken laptop: For a width of 3 inches from top to bottom on the right, the pixels are dead. As a result, only a part of the notification tray at the bottom is visible.
Is there a file modification that could start the tray 3 inches to the left (facing screen) of where it now starts?
TIA for your assistance.
[color=blue]B.K. Johnson
tahrpup-6.0.5 PAE (upgraded from 6.0 =>6.0.2=>6.0.3=>6.0.5 via quickpet/PPM=Not installed); slacko-5.7 occasionally. Frugal install, pupsave file, multi OS flashdrive, FAT32 , SYSLINUX boot, CPU-Dual E2140, 4GB RAM[/color]
tahrpup-6.0.5 PAE (upgraded from 6.0 =>6.0.2=>6.0.3=>6.0.5 via quickpet/PPM=Not installed); slacko-5.7 occasionally. Frugal install, pupsave file, multi OS flashdrive, FAT32 , SYSLINUX boot, CPU-Dual E2140, 4GB RAM[/color]
/root/.jwmrc-tray is the config file for the tray.
The settings at the beginning of this file control tray position.
Could try to change them.
layout="vertical" will put the tray vertical along the left side of desktop.
halign="center" will place it in center.
halign="right" is used to place it vertical, on right side, when layout is set to vertical. Halign="left" is normal for all other settings.
The settings at the beginning of this file control tray position.
Could try to change them.
layout="vertical" will put the tray vertical along the left side of desktop.
halign="center" will place it in center.
halign="right" is used to place it vertical, on right side, when layout is set to vertical. Halign="left" is normal for all other settings.
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
- Subito Piano
- Posts: 731
- Joined: Mon 28 May 2007, 03:12
- Location: UPSTATE New York
- Contact:
Back up your hidden file /root/.jwmrc-tray, the one bigpup refers to -- just in case. Then open the original one for editing.
Near the top -- line 3 for me -- change the width from the default 0 (full width) to, say, 800. Save, restart your window manager, and see if you like it. Try a larger or smaller number until it looks right.
[EDIT: thanks, bigpup, for pointing out my mistake with the file name in the original post. Fixed.]
Near the top -- line 3 for me -- change the width from the default 0 (full width) to, say, 800. Save, restart your window manager, and see if you like it. Try a larger or smaller number until it looks right.
[EDIT: thanks, bigpup, for pointing out my mistake with the file name in the original post. Fixed.]
Last edited by Subito Piano on Sun 10 May 2020, 13:49, edited 2 times in total.
[color=green]"God is love" - [url=https://www.esv.org/1+John+4/]I John 4:12[/url][/color]
🧠🧠🧠Rockin' on a 2007 IBM/Lenovo T60 Centrino Duo with 32-bit XenialPup 7.5! :D
(A/V Linux for live digital synth needs)
🧠🧠🧠Rockin' on a 2007 IBM/Lenovo T60 Centrino Duo with 32-bit XenialPup 7.5! :D
(A/V Linux for live digital synth needs)
To be clear /root/.jwmrc-tray controls the tray.
/root/.jwmrc is not the file to change.
OK.
If you change the width= setting.
The halign= left or right will control the side it aligns to.
/root/.jwmrc is not the file to change.
OK.
If you change the width= setting.
The halign= left or right will control the side it aligns to.
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
- Subito Piano
- Posts: 731
- Joined: Mon 28 May 2007, 03:12
- Location: UPSTATE New York
- Contact:
Re: JWM crashes
The behavior is a weird one.O.F.I.N.S.I.S. wrote:Cant't confirm this for bionic64.proebler wrote:I am running both BionicPub64 and 32 and find that JWM crashes to a command screen when moving a window through Alt+F2 > Move or when selecting Move from the Window's drop-down menu.
I suspect this may be a known issue with JWM.
Is it ??
System log:regardsCode: Select all
May 8 10:58:14 puppypc28318 kern.info kernel: jwm[11096]: segfault at a0 ip 000055fb9bc6cb06 sp 00007fff580526a0 error 6 in jwm[55fb9bc4f000+36000]
proebler
Though, I'm running my own WoofCE built using a real time kernel.
It happens with the 1st opened window after boot up or after a restart of the graphical server.
... So would someone care to do a restart of the graphical server (from the shut down menu),
then open a window, say pFind
then use Alt+F2
then chose 'Move' from the menu offered.
I have found the behavior in UpupBionic, DD_Stretch-7.5, Xenial-705. All these have JWM 2.3.7
With Slacko-6.9.6.4 , which has JWM 2.3.2 , there is no crash.
proebler
Re: JWM crashes
Problem confirmed - need to ascertain whether this is a problem specific to Puppy and if it is a generel problem raise an issue at:proebler wrote: ... So would someone care to do a restart of the graphical server (from the shut down menu),
then open a window, say pFind
then use Alt+F2
then chose 'Move' from the menu offered.
I have found the behavior in UpupBionic, DD_Stretch-7.5, Xenial-705. All these have JWM 2.3.7
With Slacko-6.9.6.4 , which has JWM 2.3.2 , there is no crash.
proebler
https://github.com/joewing/jwm/issues
Can't find any reference to it as a known problem....
jwm[***]: segfault at 78 ip *** sp *** error 6 in jwm
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
@proebler & @peebee - this doesn't happen with ScPup64 (its standard jwm is 2.3.6; I run 2.3.7), so not an all-pup issue.
EDIT:
I'm wrong! - ScPup64-19.0x use jwm 2.3.6. Appears to be a jwm 2.3.7 issue - was compiled without fribidi in ScPup64-19.0x, but bionicpup64 has fribidi & still crashes. Strange.
.
EDIT:
I'm wrong! - ScPup64-19.0x use jwm 2.3.6. Appears to be a jwm 2.3.7 issue - was compiled without fribidi in ScPup64-19.0x, but bionicpup64 has fribidi & still crashes. Strange.
.
Last edited by ozsouth on Tue 12 May 2020, 02:29, edited 6 times in total.