Edit: After setting my router to be an access point only it works.
I just installed the OS, and setup the network connection.
I'm not able to access any webpage, or even ping/access my router.
I was also having the same problems on windows, before installing. However I was able to remotely connect with TightVNC.
(Manual settings)
IP address: 192.168.2.7
Subnet mask: 255.255.255.0
Default gateway: 192.168.2.1
DNS servers: 192.168.2.1, 192.168.15.1
eth0: NIC Link is Up 100 Mbps Full Duplex
ipconfig from windows computer with working connection:
C:\Users\Admin>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Admin-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : Belkin
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : Belkin
Description . . . . . . . . . . . : Marvell Yukon 88E8040 PCI-E Fast Ethernet Controller
Physical Address. . . . . . . . . : 00-21-9B-F6-44-5E
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::fc8c:9122:7222:8bb1%11(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.2.2(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Tuesday, March 05, 2013 3:30:20 AM
Lease Expires . . . . . . . . . . : Monday, April 14, 2149 2:39:08 AM
Default Gateway . . . . . . . . . : 192.168.2.1
DHCP Server . . . . . . . . . . . : 192.168.2.1
DHCPv6 IAID . . . . . . . . . . . : 234889627
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-C4-25-DF-00-21-9B-F6-44-5E
DNS Servers . . . . . . . . . . . : 192.168.2.1
192.168.15.1
NetBIOS over Tcpip. . . . . . . . : Enabled