Page 4 of 7
Posted: Tue 10 Sep 2013, 15:49
by radky
PupClockset-2.2.1
- Added support for lxpanelx in LxPup-by-SFS. (thanks peebee)
http://murga-linux.com/puppy/viewtopic.php?t=61633
Re: Precise version
Posted: Fri 13 Sep 2013, 15:46
by ikaros262
Can't download
The site just reloads the same page. No download dialog.
Re: Precise version
Posted: Fri 13 Sep 2013, 16:39
by peebee
ikaros262 wrote:
Can't download
The site just reloads the same page. No download dialog.
Hi
Just tried - both downloaded OK for me....and md5sum checked OK
Did you click "Open" for the SFS download from e-nautia?
Which download was failing - the sfs from enautia or the pet from 5gbfree?
Suggest try again.....
Cheers
peebee
Re: Precise version
Posted: Mon 16 Sep 2013, 18:00
by ikaros262
peebee wrote:ikaros262 wrote:
Can't download
The site just reloads the same page. No download dialog.
Hi
Just tried - both downloaded OK for me....and md5sum checked OK
Did you click "Open" for the SFS download from e-nautia?
Which download was failing - the sfs from enautia or the pet from 5gbfree?
Suggest try again.....
Cheers
peebee
The sfs. I had to switch to Windows for enautia to allow me to get the file
thanks
Re: Precise version
Posted: Wed 18 Sep 2013, 22:22
by peebee
ikaros262 wrote:The sfs. I had to switch to Windows for enautia to allow me to get the file
thanks
Which browser on which Puppy were you using???
I need to know if there is a more general problem with enautia downloads.....
Re: Precise version
Posted: Wed 18 Sep 2013, 23:10
by ikaros262
peebee wrote:ikaros262 wrote:The sfs. I had to switch to Windows for enautia to allow me to get the file
thanks
Which browser on which Puppy were you using???
I need to know if there is a more general problem with enautia downloads.....
Seamonkey at Puppy Precise 571
Posted: Thu 19 Sep 2013, 10:39
by Eyes-Only
All of them downloaded fine for me - and I'm using SeaMonkey v2.20 from Precise-5.7.1.
I hope this helped somehow? Maybe caused you to pulled even more hair out PeeBee. I hope not! You should see how bald I've become because of nutty little things like this!
Cheers/Amicalement,
Eyes-Only
"L'Peau-Rouge d'Acadie"
Posted: Thu 19 Sep 2013, 12:58
by peebee
Eyes-Only wrote:All of them downloaded fine for me - and I'm using SeaMonkey v2.20 from Precise-5.7.1.
I hope this helped somehow? Maybe caused you to pulled even more hair out PeeBee. I hope not! You should see how bald I've become because of nutty little things like this!
Cheers/Amicalement,
Eyes-Only
"L'Peau-Rouge d'Acadie"
Thanks Eyes-Only - I too can download AOK using SeaMonkey in Precise5.7.1 so ikaros262 must have some specific problem with his? setup....only thing I can think of might be lack of savefile if he? is downloading there....
You will be pleased to know that no hair has been lost as a result of this....but thanks for your concern lol.
Cheers
peebee
Installation / deactivation improvements
Posted: Sun 22 Sep 2013, 14:45
by peebee
22-Sep-13
The pets have been updated to version 021 - the change is that the installation process has been given an "improved" window manager activation switch.
At the same time, deactivation and switching back to JWM or the previous WM is achieved by using the Puppy Package Manager to unload the pet.
Cheers
peebee
Version for Slacko & Upup-Precise
Posted: Sun 06 Oct 2013, 14:43
by peebee
UPDATED VERSION 4-dec-13
Install as described in post #1
For Slacko 5.6 and Upup-Precise 3.8.3.1:
lxpup-by-sfs_S.5.6.04.sfs 1b9e51ae27147ed284248e0c1103eb80 14.4MB
PLUS the attached pet
Upup-Raring version
Posted: Sun 06 Oct 2013, 14:45
by peebee
NEW VERSION 14-dec-13
Install as described in post #1
For Upup Raring 3.9.9:
4918131444f44abcedddbb449b34f0c7
lxpup-by-sfs_R.3.9.9.04.sfs c. 15MB
PLUS the attached pet
New versions 6-oct-13
Posted: Sun 06 Oct 2013, 14:50
by peebee
New versions for Slacko 5.6 and Upup-Precise 3.8.3 and Upup-Raring 3.9.9 have been uploaded in the previous 2 posts.
These new versions have look-and-feel changes and include a new icon set plus new themes and theme engines plus cursors.
They are a bit bigger at 15MB.
The setup pet for the compiz add-on has also been updated to match.
Cheers
peebee
Precise 5.7.1 version
Posted: Tue 08 Oct 2013, 19:11
by peebee
NEW VERSION 17-nov-13
Install as described in post #1
For Precise Puppy 5.7:
e5848a1db62fd9e84a855833f4d55f3c
lxpup-by-sfs_P.5.7.04.sfs c. 15MB
PLUS this pet:
lxpupsetup-p.5.7.041.pet c. 720KB (last update 17-nov-13)
Optional top panel added
Posted: Wed 09 Oct 2013, 10:23
by peebee
I've added an optional top panel with commonly used applications + a new button on the Desktop Change appearance menu item to activate it.
Only the pets are affected and have been updated.
Cheers
peebee
LxPup13.11
Posted: Sat 12 Oct 2013, 11:08
by peebee
I have made full iso distributions - LxPup-13.11 - based on LxPup-by-SFS - see
http://murga-linux.com/puppy/viewtopic. ... 071#730071
In 3 "flavours" - for Slacko5.6 4g & pae and for Precise5.7.1 pae.
Cheers
peebee
New versions
Posted: Sun 17 Nov 2013, 11:10
by peebee
17-nov-13
All versions have been updated - sfs's to version "04" - pets to version "41" to match the LxPup13.11 isos.
Cheers
peebee
Dpup Wheezy version
Posted: Sat 14 Dec 2013, 21:19
by peebee
14 Dec 2013
Here is a version of LxPup-by-SFS for Pemasu's Dpup Wheezy 3.5.2
The SFS is actually the Slacko one:
lxpup-by-sfs_S.5.6.04.sfs 1b9e51ae27147ed284248e0c1103eb80 14.4MB
The setup pet is however unique to Dpup Wheezy:
lxpupsetup-d.3.5.2.pet 0997979faba7c1ce69c090c8e5755531 722KB
Install as described in post #1
Cheers
peebee
Posted: Sun 15 Dec 2013, 23:50
by 01micko
Peter
Here is a work around for the icon problems in newer woof-CE pups, it should only run if the autostart dir is populated.
Code: Select all
#!/bin/sh
if [ -d $XDG_CONFIG_HOME/autostart/ ];then
for file in $XDG_CONFIG_HOME/autostart/*.desktop
do
[ "$file" ]||exit
EXEC=`grep ^Exec $file|cut -d '=' -f2|awk '{print $1}'` #strip options
[ "$EXEC" = "firewallstaterun" ] && EXEC=firewallstate #work around
echo $EXEC #DEBUG
PID=
CNT=0
until [ "$PID" -o $CNT = 9 ]
do
echo -n "$CNT " #DEBUG
PID=`pidof $EXEC`
echo " pid: $PID" #DEBUG
[ "$PID" ] && kill -9 $PID && break
CNT=$(($CNT + 1))
sleep 0.5 #only sleep if needed
done
done
#sleep 1
for desktop in $XDG_CONFIG_HOME/autostart/*.desktop
do
echo $desktop #DEBUG
xdg-open $desktop
done
fi
Goes in ~/Startup/
#Comment the lines marked #DEBUG
You can do away with that hack in 1-lxde-startup.sh (line 6), or at least make it conditional, something like a test for the desktop files, or even better, kill and rerun all files in /root/startup or as a last resort add some sleep at the top of the code I just posted, and call it zhack (or something with a z so it execs last).
Posted: Mon 16 Dec 2013, 07:18
by peebee
01micko wrote:Peter
Here is a work around for the icon problems in newer woof-CE pups,
Gosh!! Thanks Mick.....
Grateful if you could say in simple terms what your patch does?
And do you know why it is needed? Is it a bug in lxpanelx?
Will the patch be needed as a permanent feature of any systems using lxpanel/lxpanelx?
I had started to work out last night where the problem lay and had discovered that if I moved all the tray items from .config/autostart to /etc/autostart and removed the line #6 then the icons worked unless a panel restart was done. But that was as far as i had got.
Thanks
Peter
BTW - for other interested readers, this only applies to the new testing versions of Slacko5.7 which contain new svg icons.
Posted: Mon 16 Dec 2013, 11:27
by 01micko
Hi Peter,
It's a bug in lxpanelx. A timing issue. As
SFR stated lxpanel is unaffected.
I would report it to the developer if I were you. He may be able to add a few milliseconds delay or track down the issue that causes it.
Oh, and if he tells you try starting from /etc/xdg/lxsession/LXDE/autostart (aka $XDG_CONFIG_DIR/LXDE/autostart) file the same issue occurs. (that file can be in $XDG_CONFIG_HOME/LXDE/ too)
What my work around does (and that's all it is) is kill each process when it is actually started (because it doesn't get the background colour) then restart them. It's pretty simple actually, just finds each process ID when it starts, kills it, then once they are all killed it restarts them. The slow down is powerapplet_tray as on desktops it doesn't run, so the full 4 seconds (sleep 0.5 x 8 ) [ ha.. cant post digit 8 character ')' on the forum, get
] is taken up. Not a huge issue. I think that restart you are doing is rather the problem with the cpu maxing out issue.
In my tests it works flawlessly with line 6 commented (in 1-lxde-startup.sh)
HTH