GUI to download LibreOffice - beta quality
DC
Thanks for testing
I actually tested in FD-520-rc1 as I didn't have time to download FD-520-final and it loaded fine with sfs_load in the fly. It worked too with limited testing.
It seems the sfs must have built ok?
If it's happening with other sfs designed for FD then you may have to take it up with kirk, there is probably a very simple fix.
Cheers
Thanks for testing
I actually tested in FD-520-rc1 as I didn't have time to download FD-520-final and it loaded fine with sfs_load in the fly. It worked too with limited testing.
It seems the sfs must have built ok?
If it's happening with other sfs designed for FD then you may have to take it up with kirk, there is probably a very simple fix.
Cheers
Puppy Linux Blog - contact me for access
There is a patch for this here.DC wrote:Hi 01micko,
Just tried with fatdog frugal 520
got this error message
fatal:Required squashfs version 3, but 'LibreOffice-3.4.3_64_en-
GB.sfs' seems squashfs version 4
not sure where the problem is as I'm also getting this message with other SFS's
DC
- L18L
- Posts: 3479
- Joined: Sat 19 Jun 2010, 18:56
- Location: www.eussenheim.de/
Hi 01micko,
Just tried with wary513 frugal.
excellent and fast enough on my 1.5GHz box.
Just 1 comment:
I know that JRE is required
I had none at installing
LO could not exit always the message: Install JRE....
OK and endless loop.
No problem for me, but maybe a check on existing JRE at beginning could be helpful for others
Thank you
L
Just tried with wary513 frugal.
excellent and fast enough on my 1.5GHz box.
Just 1 comment:
I know that JRE is required
I had none at installing
LO could not exit always the message: Install JRE....
OK and endless loop.
No problem for me, but maybe a check on existing JRE at beginning could be helpful for others
Thank you
L
I did test in Wary awhile back, can't recall any issues. In Slacko I get the java warning 5 times and dismiss it then start LO again and it's ok. Maybe just a warning that Java is "desired" and if LO fails then is "required", what do you think? I guess LO devs know about this and I'm a bit surprised that with the split from Oracle that they don't eliminate Java dependency.L18L wrote:Hi 01micko,
Just tried with wary513 frugal.
excellent and fast enough on my 1.5GHz box.
Just 1 comment:
I know that JRE is required
I had none at installing
LO could not exit always the message: Install JRE....
OK and endless loop.
No problem for me, but maybe a check on existing JRE at beginning could be helpful for others
Thank you
L
Cheers
Puppy Linux Blog - contact me for access
Java is apparantly needed only for the Impress and Database functions. All other features appear to work well without Java.01micko wrote:I did test in Wary awhile back, can't recall any issues. In Slacko I get the java warning 5 times and dismiss it then start LO again and it's ok. Maybe just a warning that Java is "desired" and if LO fails then is "required", what do you think? I guess LO devs know about this and I'm a bit surprised that with the split from Oracle that they don't eliminate Java dependency.L18L wrote:Hi 01micko,
Just tried with wary513 frugal.
excellent and fast enough on my 1.5GHz box.
Just 1 comment:
I know that JRE is required
I had none at installing
LO could not exit always the message: Install JRE....
OK and endless loop.
No problem for me, but maybe a check on existing JRE at beginning could be helpful for others
Thank you
L
Cheers
-
- Posts: 154
- Joined: Wed 10 Aug 2011, 21:41
- Location: United States
- Contact:
Encountered odd behavior with this program today. I am running 5.25 retro and 5.28 on a desktop. I am also running 5.28 on a netbook. I tried this program without success in each os on each computer. It will only download the help file. It will not download the english language pack or the main program. I ran the program several times throughout the day thinking that it might be a temporary issue on their server but no success even after coming back to it several hours later.
Working ok for me as I type.. . It certainly is possible that it is(was) a server issue, I have encountered it on numerous occasions. Maybe try another day?roadkill13 wrote:I ran the program several times throughout the day thinking that it might be a temporary issue on their server but no success even after coming back to it several hours later.
I'd also be interested to know what feedback the program gave you, any error messages? There is error control in place but it could be improved upon.
Puppy Linux Blog - contact me for access
-
- Posts: 154
- Joined: Wed 10 Aug 2011, 21:41
- Location: United States
- Contact:
@01micko
Still not working here. Just tried it again. It downloaded the help files just as it has before. Once downloaded a new window pops up as though the next file would be downloaded. It closes almost as soon as it opens. No chance to see the dialogue. A pinkish colored gtk dialogue is then presented with the message "failed to download please try again later".
I assume that the error message that you were asking for would have been in the download console window for the failed download but it opens and closes so quickly that it is not possible to observe.
Still not working here. Just tried it again. It downloaded the help files just as it has before. Once downloaded a new window pops up as though the next file would be downloaded. It closes almost as soon as it opens. No chance to see the dialogue. A pinkish colored gtk dialogue is then presented with the message "failed to download please try again later".
I assume that the error message that you were asking for would have been in the download console window for the failed download but it opens and closes so quickly that it is not possible to observe.
can you post the contents of /tmp/getlibre_lang please?
I may have to do some better logging to debug failure. The splash screen announcing failure indicates that wget failed to get a connection to the server, throwing an exit code other than 0.
I may have to do some better logging to debug failure. The splash screen announcing failure indicates that wget failed to get a connection to the server, throwing an exit code other than 0.
Puppy Linux Blog - contact me for access
-
- Posts: 154
- Joined: Wed 10 Aug 2011, 21:41
- Location: United States
- Contact:
Ok, I'll see where the breakdown happens.. has the prog ever worked for you before?
Also, which version of LO were you attempting to retrieve?
Also, which version of LO were you attempting to retrieve?
Puppy Linux Blog - contact me for access
-
- Posts: 154
- Joined: Wed 10 Aug 2011, 21:41
- Location: United States
- Contact:
I have found the bug. You are attempting to get extra lang pack(s) correct? This fails. I'll fix it soon, but not right now, probably by tomorrow.
Thanks for reporting.
Thanks for reporting.
Puppy Linux Blog - contact me for access
-
- Posts: 154
- Joined: Wed 10 Aug 2011, 21:41
- Location: United States
- Contact:
roadkill13 and those interested,
Posted a bugfixed and enhanced version, I completely changed the routine for getting the extra packages, there was a fundamental mistake.
see main post
Cheers
Posted a bugfixed and enhanced version, I completely changed the routine for getting the extra packages, there was a fundamental mistake.
see main post
Cheers
Puppy Linux Blog - contact me for access
- L18L
- Posts: 3479
- Joined: Sat 19 Jun 2010, 18:56
- Location: www.eussenheim.de/
LO
I can't recall whether the3 loop was endless or just 5 times but I should have mentioned that I have3 installed sfs_load and started LO directly there from (and started get_LibreOffice from command line).01micko wrote:I did test in Wary awhile back, can't recall any issues. In Slacko I get the java warning 5 times and dismiss it then start LO again and it's ok. Maybe just a warning that Java is "desired" and if LO fails then is "required", what do you think? I guess LO devs know about this and I'm a bit surprised that with the split from Oracle that they don't eliminate Java dependency.L18L wrote:Hi 01micko,
Just tried with wary513 frugal.
excellent and fast enough on my 1.5GHz box.
Just 1 comment:
I know that JRE is required
I had none at installing
LO could not exit always the message: Install JRE....
OK and endless loop.
No problem for me, but maybe a check on existing JRE at beginning could be helpful for others
Thank you
L
Cheers
I have understood the message that java IS required.
But it is not.
First thing I have done today, with puppy, was launching from menu
LO writer no msg
then impress and database ; thank you jim
now i know that java is not required
note i had installed lo as sixth sfs and removed one afterwards
sorry for all lower case
that can happen if keyboard is wet :::::::
-
- Posts: 154
- Joined: Wed 10 Aug 2011, 21:41
- Location: United States
- Contact:
@01micko
Thank you for updating this application. I tried the 0.9 version moments ago. Regrettably I must report identical results with 0.9 as with 0.8.
If I deselect the help file and the en_us language pack (these are selected by default) the application downloads and successfully installs Libre Office.
Doing this required that I proceed to the Libre Office website and manually download the help file which I installed using petget.
I noticed that when the application made the Libre Office sfs it included en_us in the name of the sfs. A check of the Libre Office website revealed that en_us language pack is not available for download.
Assuming that gui installer failed because there is no en_us language pack available for download the next step was to clean up the current installation and start all over.
This time I "deselected" the en_us language pack but left the default selection for the help files as is. The installer downloaded Libre Office and successfully completed the process. However it ignored the help file package entirely. I still needed to download that manually and install it after the fact.
Question:
Who deleted my original edit
Thank you for updating this application. I tried the 0.9 version moments ago. Regrettably I must report identical results with 0.9 as with 0.8.
If I deselect the help file and the en_us language pack (these are selected by default) the application downloads and successfully installs Libre Office.
Doing this required that I proceed to the Libre Office website and manually download the help file which I installed using petget.
I noticed that when the application made the Libre Office sfs it included en_us in the name of the sfs. A check of the Libre Office website revealed that en_us language pack is not available for download.
Assuming that gui installer failed because there is no en_us language pack available for download the next step was to clean up the current installation and start all over.
This time I "deselected" the en_us language pack but left the default selection for the help files as is. The installer downloaded Libre Office and successfully completed the process. However it ignored the help file package entirely. I still needed to download that manually and install it after the fact.
Question:
Who deleted my original edit