Page 86 of 90
Posted: Thu 29 Jun 2017, 14:04
by bigpup
Pale Moon 27.3.0
That video plays Ok for me.
I have no plugins or extensions in this Pale Moon, so it is using HTML5 to play videos.
If you have Flash Player active in Plugins. Try disabling it.
Posted: Thu 29 Jun 2017, 22:12
by 6502coder
Cadejo wrote:I previously wrote:No problems for me. I tried a dozen or so, all worked just fine.
Pale Moon 27.3.0 on TahrPup 6.0.6
Can you try this one?
http://imgur.com/gallery/NL3i26q
That one plays too. I have the latest Flash installed, but it makes no difference whether the plugin is enabled or disabled -- either way, the video plays fine for me.
Posted: Wed 05 Jul 2017, 15:00
by trefux
Rigth click mouse = press "MENU" key.
https://help.gnome.org/users/gnome-help ... -menu.html
I need some help to setup the "menu key" on the keyboard. Is it possible?
Thanks
Posted: Thu 06 Jul 2017, 16:29
by ethplorer
does this pup has updated browsers?
Posted: Thu 06 Jul 2017, 16:57
by bigpup
It comes with PaleMoon browser.
If you use PaleMoon it can be easily kept updated by using the
menu->Internet->Palemoon-updater.
Posted: Tue 11 Jul 2017, 21:00
by rufwoof
Thanks Ledster.
Just built a Tahr 6.0.6 32 bit PAE using
these woofce instructions. First time worked for me (a long time since I last tried) and I used all the defaults choices. Only non default choice was choice of kernel out of 25 or so choices. I had no idea as to which to choose so I went for something like the 3rd choice which is kernel 3.12.22. Generally working great, so can't see a need to change that, but did notice that the change kernel quickpet link that you highlighted was broken (404 not found).
The build took around 1 to 1.5 hours or so. Short and easy enough IMO to periodically update everything to the latest versions.
Posted: Fri 14 Jul 2017, 16:06
by rufwoof
bigpup wrote:It comes with PaleMoon browser.
If you use PaleMoon it can be easily kept updated by using the
menu->Internet->Palemoon-updater.
If its the same for the 32 bit version as the 64 bit tahr, if you have Palemoon set to run as spot then using that upgrade method results in that being lost (reverts to running as root). The fix for that is to menu, setup, quicksetup first run and reset palemoon to run as root then reset again to run as spot.
lsof -i is the limited busybox in Puppy, if you install the full version of lsof from ppm and run lsof -i in a terminal whilst palemoon is running it will show what userid palemoon is running under.
Pale Moon: .gifs won't work
Posted: Sat 15 Jul 2017, 10:33
by kb8amz
Cadejo: Team,
Please use Pale Moon to view
http://www.imgur.com
Do several of the .gifs & webm videos not play?
I tried several videos and several .gif having no problem viewing using Pale Moon Version: 27.4.0 (64-bit) on TahrPup64, tahr64, 64 bit.
the browser stop working when i go on 'télé Loisirs'
Posted: Mon 21 Aug 2017, 16:56
by Pelo
I was posting to congratulate about SSR included in 64 bits version.
Post-scriptum
As you are speaking of Palemoon, the browser stop working when i go on the French tv programs 'Télé Loisirs'
Not with others as 'télé 7 jours'.
If people from France here, could you give a try please (essayez)
Do Not Format as Ext4 and Expect Grub4dos to work
Posted: Mon 21 Aug 2017, 17:18
by mikeslr
Posted: Tue 22 Aug 2017, 12:43
by torm
Hello.
What driver (and where) should I look for this graphics card:
ATI Radeon 9250/9200, AGP, 128MB, VGA + S-VHS
xorgwizard will not give usable picture.
Appears to work OOTB with BodhiLinux, unfortunately I don't remember
the passwords for it to dig deeper.
PS. the model name: Radeon 9250/9200 or "9200 series" is from WinXP properties
One of the few cards that fits this computer casing.. for height.
Posted: Fri 25 Aug 2017, 06:11
by thinkpadfreak
torm wrote:
> What driver (and where) should I look for this graphics card:
> ATI Radeon 9250/9200, AGP, 128MB, VGA + S-VHS
> xorgwizard will not give usable picture.
I am afraid that AGP based graphics cards do not work well with Tahrpup, due to KMS(kernel mode setting) which is a default on Tahrpup.
So, I still use Puppy 4 series and Lupu 528 on ThinkPad T42, whose video card is ATI Radeon Mobility 7500.
Graphics adrive for X-Tahr 2.0
Posted: Sun 27 Aug 2017, 08:48
by Pelo
Graphics adrive for X-Tahr 2.0 installed on my Tahrpup .
Its so full featured for photographic works as Libre Office for typists.
Shotwell ? is included in Tahrpup 6.0.5 (Triton petihar)
palemoon 27.1.0 segfaults on tahrpup-6.0.6
Posted: Tue 05 Sep 2017, 13:20
by charlie6
Hi,
just got this palemoons segfault after less than 10 minutes browsing:
(I restarted palemoon from console to get error comments and reproduced the segmentation fault):
Code: Select all
root# palemoon
(pale moon:20600): GLib-GObject-WARNING **: Attempt to add property GnomeProgram::sm-connect after class was initialised
(pale moon:20600): GLib-GObject-WARNING **: Attempt to add property GnomeProgram::show-crash-dialog after class was initialised
(pale moon:20600): GLib-GObject-WARNING **: Attempt to add property GnomeProgram::display after class was initialised
(pale moon:20600): GLib-GObject-WARNING **: Attempt to add property GnomeProgram::default-icon after class was initialised
ATTENTION: default value of option force_s3tc_enable overridden by environment.
Segmentation fault
root#
HTH, Charlie
Posted: Tue 05 Sep 2017, 14:57
by bigpup
Try updating Pale Moon to the latest version. 27.4.2
menu>Internet>Palemoon-updater
Posted: Thu 14 Sep 2017, 10:15
by redandwhitestripes
Can anyone help me get a Chromium-based browser functional on Tahr?
Using 32bit Tahr on my HP laptop, *any* chromium-based browser crashes the system. Be it Slimjet, Chrome or Chromium, it will sometimes run for 10 seconds or so, sometimes instantly will blank the screen, permanently.
I can type 'reboot' and the system reboots (but I can't see what I type).
This happens before or after downloading the bugfixes, with .pet installs or sfs installs, there's no change.
Any way to get one of these browsers working? It makes it easier to stream my music and watch videos on bitchute.com which doesn't work in Palemoon.
Many thanks,
Greg
PS No such problems on Tahr64 on my desktop
Chromium-based browser
Posted: Thu 14 Sep 2017, 12:38
by sheldonisaac
redandwhitestripes wrote:Using 32bit Tahr on my HP laptop, *any* chromium-based browser crashes the system. Be it Slimjet, Chrome or Chromium
Greg, I'm using the Iron browser 58.0.3050.0 with tahrpup 6.0.6 on this Dell Latitude E6410
Posted: Thu 14 Sep 2017, 13:12
by number698
Is there a way to un-hide palemoon after it;s been removed using the 'remove builtin packages' app ?
Posted: Thu 14 Sep 2017, 13:57
by watchdog
An old trick by mikeb:
http://www.murga-linux.com/puppy/viewto ... 213#728213
I do not know if it is still working in modern puppies.
Posted: Thu 14 Sep 2017, 17:33
by number698
thanks watchdog .
I guess it's change a little, looked into /initrd/pup_rw/ but found no clues.
I did find a wh. file in /opt/palemoon, deleted it, rebooted - but did not unhide palemoon.
Iv'e copied palemoon from a fresh save file into to my save folder but it's too messy for my liking - no menu entry, no default browser option to set to palemoon and no palemoon updater has been un-hidden.