What if you try the middle mouse button to paste, does that work?april wrote:No, on Precise it is not getting to the glipper memory for some reason.
Tried xclipper also to no effect
edit: I just tried it X-Precise, copies and pastes ok
What if you try the middle mouse button to paste, does that work?april wrote:No, on Precise it is not getting to the glipper memory for some reason.
Tried xclipper also to no effect
http://www.murga-linux.com/puppy/viewto ... 924#715924april wrote:What is X-Precise?
X-Precise does not work with AMD processors it seems . Guess what I have in my Dell Optiplex 745Version 3.4.12 September 29th, 2015
Fixed some issues with system clipboard
Fixed some issues in Linux with incorrect DPI values
Could you hover over each of the buttons I have circled in this pic and let us know what the tooltip descriptions are for each of these two buttons? Seems that there are different copy modes.april wrote:So there is something in the "copy" function it uses that does not work for me in Precise 5.7.1.
If I load one PDF, a ETF (investment fund) PDF I can activate the select (arrow) tool and click on each word. The select text also allows you to select multiple words and copy/paste.Interestingly if I insert some text on the page I can copy and paste that as you would expect to do with all . Could it be that the .pdf file is originally created from images and does not load text at all on startup only images
Yes, I think you are right - I can copy the text you inserted, but the rest of the text cannot be selected with the text tool although it can be selected as one fullpage block using the arrow tool (far left hand side icon). That original text is not aligned to the page - it is skewed - which suggests it was a scanned image in the first place and accessible as an image only.april wrote:Could it be that the .pdf file is originally created from images and does not load text at all on startup only images . I tried to copy images but that does not work either so perhaps each page is one full image.
Here is one page that I exported into jpg to try and a page in .pdf I hope
That's more for larger organisations, where individuals have secure digital signatures and authors can submit a document for approval or registration usually with limited edit/change options available for others. i.e. a document approver might approve the document by attaching their digital signature.I notice it has a signature option, though I haven't taken the time to figure it out.
Code: Select all
./masterpdfeditor
# ./masterpdfeditor3
./masterpdfeditor3: symbol lookup error: /usr/lib/libQtNetwork.so.4: undefined symbol: _ZN16QIODevicePrivate4peekEPcx
#
[quote]
Now thats a bit weird as this same symbol is also not found by the program So I'm trying to work out whats interfering in the QT library which is loaded by .sfs file?
[/quote]
Code: Select all
[General]
last_check_update=1449956012
Units=points
lang=
show_icons=true
openFilePath=/root
saveFilePath=/root
create_backup_file=true
destination_save_as=0
str_destination_save_as=/root
antialiasing_text=true
antialiasing_image=true
antialiasing_path=true
check_updates=0
default%20font=DejaVu Sans Book
default%20font%20size=12
default%20font%20color=4278190080
mouse_move_time=100
show%20MediaBox=false
enable_javascript=true
change_font=true
show%20FormWidget=true
show%20ObjectInspector=false
Fusion%20Dark%20Style=false
default%20PageLayout=0
default%20PageZoom=0
restore_last_session_application=false
restore_last_session_files=false
highlight_form_color=4294959119
highlight_required_form_color=4294901760
page_background_color=4286611584
page_text_color=4294967295
replace_doc_color=false
selected_item_hover_mouse=false
Show%20Statusbar=true
Show%20Main_Tool_Bar=true
Show%20Tools_Tool_Bar=true
Show%20View_Tool_Bar=true
Show%20Edit_Tool_Bar=true
Show%20Forms_Tool_Bar=true
Show%20Comments_Tool_Bar=true
Show%20Find_Tool_Bar=true
Geometry%20ToolBars=@ByteArray(\0\0\0\xff\0\0\0\0\xfd\0\0\0\0\0\0\x4\0\0\0\x2K\0\0\0\x4\0\0\0\x4\0\0\0\b\0\0\0\b\xfc\0\0\0\x2\0\0\0\x2\0\0\0\x4\0\0\0\x16\0m\0\x61\0i\0n\0T\0o\0o\0l\0\x42\0\x61\0r\x1\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x16\0\x65\0\x64\0i\0t\0T\0o\0o\0l\0\x42\0\x61\0r\x1\0\0\0\xeb\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x16\0v\0i\0\x65\0w\0T\0o\0o\0l\0\x42\0\x61\0r\x1\0\0\x2\xb1\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x16\0\x66\0i\0n\0\x64\0T\0o\0o\0l\0\x42\0\x61\0r\x1\0\0\x3Y\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x2\0\0\0\x3\0\0\0\x18\0t\0o\0o\0l\0s\0T\0o\0o\0l\0\x42\0\x61\0r\x1\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x18\0\x66\0o\0r\0m\0s\0T\0o\0o\0l\0\x42\0\x61\0r\x1\0\0\0\xb7\xff\xff\xff\xff\0\0\0\0\0\0\0\0\0\0\0\x1e\0\x63\0o\0m\0m\0\x65\0n\0t\0s\0T\0o\0o\0l\0\x42\0\x61\0r\x1\0\0\x1\xd4\xff\xff\xff\xff\0\0\0\0\0\0\0\0)
version=3510
resolution_dpi=0
leftTabSize=439
isMaximized=true
Geometry%20Main%20Form=@ByteArray(\x1\xd9\xd0\xcb\0\x1\0\0\0\0\0\0\0\0\0\0\0\0\x3\xff\0\0\x2\xeb\0\0\0\0\0\0\0\0\0\0\x2\xcb\0\0\x2\x1b\0\0\0\0\x2\0)
[resent_files_history]
size=0
https://code-industry.net/masterpdfedit ... ctivation/You can use Master PDF Editor for free for reading, filling PDF forms and document printing. The only limitation of unregistered version is watermark insertion into saved documents.
Linux version doesn’t not include this limitation and you can use not registered application for free for home use and in non-commercial purposes like education.
I just downloaded the linux 32 bit tar.gz file from https://code-industry.net/free-pdf-edit ... der_tabs-0, extracted it to a temporary folder and dropped in the latest versions masterpdfeditor-3 file as a replacement to the one already in /opt/master-pdf-editor-3.5.10/Version 3.5.81 December 28th, 2015
Optimized memory consumption.
Increased pages display speed.
Fixed issues with bookmarks and links desynchronization when removing, inserting or moving pages.
Fixed issues with uniting different text blocks into sentences.
Improved conversion XPS to PDF (different DPI is also taken into account now), added XPS bookmarks convertion.
Fixed several issues with virtual printer.
Fixed some issued with PDF forms editing.
Fixed other minor issues.
Version 3.5.16 December 15th, 2015
Added several hotkeys.
Added right-to-left writing support for PDF forms filling if required for current language.
Added possibility to set custom DPI when exporting to images, DPI range is from 1 up to 1200 now.
Fixed issues with rotated text.
i think not-registered-application is a single unit consisting of the application you didn't register. i think you're fine if you're not betraying what's underlined, and i think if you're using the linux version, no one comes to your home to carve a mark of shame into your forehead.rufwoof wrote:I'm no good with double/treble negatives, is master pdfeditor free for use or not under Linux?
https://code-industry.net/masterpdfedit ... ctivation/You can use Master PDF Editor for free for reading, filling PDF forms and document printing. The only limitation of unregistered version is watermark insertion into saved documents.
Linux version doesn’t not include this limitation and you can use [not-registered-application] for free for home use and in non-commercial purposes like education.