Slacko 5.7 - March 2014

[bigpup]

metastasis69,

If Slacko 5.6 was working OK. There is a good chance you got a bad download of the Slacko 5.7 iso file or a bad install.

The first things I would do:

Delete the install of Slacko 5.7.

Make sure you got a good download of the Slacko 5.7 iso file.

Completely reinstall Slacko 5.7.

If it still does not work.

Answer these questions:
http://www.murga-linux.com/puppy/viewtopic.php?t=90471

[cthisbear]

No wireless on a HP DV6700 that I rescued data from.

Atheros 2011 Wireless LAN Driver??????????

Hard drive very wobbly and it gets any hotter I can have my
New Years Eve fireworks in advance in Sydney OZ.

Puppy Precise 5.61 picks it up with Frisbee.

::::::::

Here's a laugh though.

"After trying about a million things, I got it to work.

I had previously uninstalled Norton Antivirus to install a different
security software.

If you uninstall Norton using the included uninstallation thing,
it WILL NOT work. It leaves parts of itself on the computer, and, in
my case, shot all my network connections (wireless and ethernet).

The problem wasn't with Linux, but the reason it worked on Linux was because Norton Antivirus was never installed there.
Should have realized that. "

http://www.bleepingcomputer.com/forums/ ... ocal-only/

Chris.

[bark_bark_bark]

Norton sucks ****

[SFR]

I don't know is it supposed to be like this, but just noticed that having two active interfaces (eth0 & wlan0), only the latter's activity is being reflected by network_tray, i.e. if there's up/download only through eth0, the icon remains dimmed.
Also, Rx/Tx in the tooltip shows only wlan0's dataflow (if any) in such case, but that's a lesser issue.

Shouldn't the icon reflect activity of all active interfaces?

Greetings!

[topia]

Hi Mick, thank you for have included the module 8021q in this version of Slacko
Thank you very much!!!

[goolwa_pup]

Hi all

not sure why but my realtek 8192cu USB wireless dongle is not recognised by Slacko 5.7. I tried loading the rtl8192cu module but still no recognition. The dongle works fine in Lupu

[kj4bnh]

Have been messing with Slacko 5.7 for a couple days. Very nicely done. No problems yet. Keep up the great work. Boot from CD, save file and system files on SD card. Me likes.

Compaq Presario CQ60
Pentium Dual-core 2 GHz
3 GB ram

[metastasis69]

metastasis69,

If Slacko 5.6 was working OK. There is a good chance you got a bad download of the Slacko 5.7 iso file or a bad install.

The first things I would do:

Delete the install of Slacko 5.7.

Make sure you got a good download of the Slacko 5.7 iso file.

Completely reinstall Slacko 5.7.

If it still does not work.

Answer these questions:
http://www.murga-linux.com/puppy/viewtopic.php?t=90471

Hi sir,
Thank you so much for the reply. I just posted a reply on the link that you've given here. I hope you can check it out and point out the things that I need to make my slacko run with ease. Thanks in Advance!!!

[SFR]

@Metastasis69: Let's keep this discussion in one place, ok?

HERE is the specifics of the computer that I'm using:

https://www.asus.com/ae-en/Desktops/Ess ... fications/

-no hard disk- using RAM mode on USB- Sandisk Cruzer 8GB

-OS-Puppy Slacko 5.7.1

-Everything works but sometimes it shut down automatically and show the KERNEL panic window.

-Slacko 5.6 works just fine on my other Sandisk Cruzer

-Sometimes the machine freezes on shutdown-shows the kernel panic window.
- I think its a bug. I download another copy from another location and symptoms is still the same. PUPPY-LUCID also works fine and no problems whatsoever. I just want the new puppy looks and aethetics of the 5.7.1 so I tried it and I have ended up with this kind of problem.


Thanks in advance or I should wait for the version 5.7.2 if everything still persists.

Thanks everyone!!!

Hmm, this might be related to recent (Slacko-5.6 -> Slacko-5.7) changes in snapmergepuppy - it's a script that handles saving session on, inter alia, USB frugal installs.
I encountered similar behavior 3 times (within one month and only during saving the session), but nailed down possible culprit and since then no probs.

Ok, you could try this:
1. Unpack the attached archive.
2. Go to latest subfolder and copy snapmergepuppy file to /usr/sbin/ directory.
3. Save the session.
(if something's not clear or you need help, just let know)

If the problem persists, this time use snapmergepuppy from slacko56 subfolder.
If still no go, then it's something else...and in such case you can keep the latest snapmergepuppy as it is faster and has some bugs fixed.

BTW, there is Precise-5.7.1, but the latest Slacko comes only as 5.7 & 5.7.0.

HTH
Greetings!

[metastasis69]

@Metastasis69: Let's keep this discussion in one place, ok?

HERE is the specifics of the computer that I'm using:

https://www.asus.com/ae-en/Desktops/Ess ... fications/

-no hard disk- using RAM mode on USB- Sandisk Cruzer 8GB

-OS-Puppy Slacko 5.7.1

-Everything works but sometimes it shut down automatically and show the KERNEL panic window.

-Slacko 5.6 works just fine on my other Sandisk Cruzer

-Sometimes the machine freezes on shutdown-shows the kernel panic window.
- I think its a bug. I download another copy from another location and symptoms is still the same. PUPPY-LUCID also works fine and no problems whatsoever. I just want the new puppy looks and aethetics of the 5.7.1 so I tried it and I have ended up with this kind of problem.


Thanks in advance or I should wait for the version 5.7.2 if everything still persists.

Thanks everyone!!!

Hmm, this might be related to recent (Slacko-5.6 -> Slacko-5.7) changes in snapmergepuppy - it's a script that handles saving session on, inter alia, USB frugal installs.
I encountered similar behavior 3 times (within one month and only during saving the session), but nailed down possible culprit and since then no probs.

Ok, you could try this:
1. Unpack the attached archive.
2. Go to latest subfolder and copy snapmergepuppy file to /usr/sbin/ directory.
3. Save the session.
(if something's not clear or you need help, just let know)

If the problem persists, this time use snapmergepuppy from slacko56 subfolder.
If still no go, then it's something else...and in such case you can keep the latest snapmergepuppy as it is faster and has some bugs fixed.

BTW, there is Precise-5.7.1, but the latest Slacko comes only as 5.7 & 5.7.0.

HTH
Greetings!

THANK you so much for the speedy answer. I will try this one. Thanks for the support!

[metastasis69]

The patch work like charm! Thank you very much. I need at least 48 hours to see some other bugs but I'm so thankful that you're around. This is the most straight to the point answer and it really make sense.... need 48 hours to check if there's any other problem. But so far I'm so satisfied with results. I got a 0.03 seconds shutdown time!!!! Amazing!!!

[SFR]

You're welcome! I understand that you have used the 'latest' one?

I need at least 48 hours to see some other bugs

Ok, I'm looking forward to your feedback.

I got a 0.03 seconds shutdown time!!!!

Well, the actual speed boost is only about 16% - are you sure the session has been actually saved (at shutdown time)?
Hmm, on the other hand if there's not much stuff to be saved, then perhaps...
Anyway, to make sure - just create any file in /root/ and reboot. If the file will be still there, it's ok.

Greetings!

[zagreb999]

Hi, o1micko!

Can you publish
latest version of Barry SNS Network
from Slacko 5.7?
Greetings.

[april]

Getting Devx with sfs finder .
This reports an error . Looking in to it the adddress used is ibiblio.org/....../5.6/devx etc.
Its looking in the 5.6 directory rather than the 5.7 .
May have been noted befor but I was not going to read 11 pages first..

[mavrothal]

Getting Devx with sfs finder .
This reports an error . Looking in to it the adddress used is ibiblio.org/....../5.6/devx etc.
Its looking in the 5.6 directory rather than the 5.7 .
May have been noted befor but I was not going to read 11 pages first..

Use SFS-Manager after you install the pet from this post

[bigpup]

From this topic:
http://www.murga-linux.com/puppy/viewtopic.php?t=93353

F2FS installer-flash drives

Has anyone gotten this program to work?

I tried running the program.

At startup I got a message about not having a needed version of syslinux.
( you have a version of syslinux that does not support boot menu)

After ignoring that message, it starts Gparted, so I can partition the USB flash drive.
After making two partitions:
32MB Fat32 partition flagged boot.
F2FS partition.

Gparted had message on the F2FS partition that said there was F2FS tools missing and needed for full support.

Got to the point of selecting type of install.
Selected full.
The program did nothing after selecting to start install.

[Doglover]

micko.... please do not change anything with the network drivers or the sound drivers.

Just bought a HP Pavilion laptop, 4gigs ram, quadcore AMD proces, of course I wiped windows 8 out like a bad dream.
I tried a few pups... latest lupu, dpup,mediapup, 4.3.1, so slacko 5.7 works very well,


▶ VIDEO CARD:

VGA controller: ATI Technologies Inc Device 9830 (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device 216f
Flags: bus master, fast device select, latency 0
Interrupt Request (IRQ): 3
Memory at e0000000 (64-bit, prefetchable) [size=256M]
Memory at f0800000 (64-bit, prefetchable) [size=8M]
I/O ports at 4000
Memory at f0300000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at f0360000 [disabled] [size=128K]
--
Video Card OEM: AMD ATOMBIOS
Card Vendor: (C) 1988-2010, Advanced Micro Devices, Inc.
Product: KALINDI 01.00
VESA BIOS Extensions: VESA 3.0 detected.
Memory: 16384kb

▶ DISPLAY/MONITOR:

Screen Dimensions: 1368x768 pixels (351x191 millimeters)
Depth of Root Window: 24 bits (planes)
Display ID: 039f
EISA: LGD039f
Serial: 00000000
Manufacture: 0 2012
Input: composite sync, digital signal.
Screensize: 35 19
Gamma: 2.200000
Dpms: RGB, no active off, no suspend, no standby
Dtiming: 1366x768@59
Dtiming: 1366x768@39
--
Direct Rendering: Yes
OpenGL Vendor: VMware, Inc.
OpenGL Renderer: Gallium 0.4 on llvmpipe (LLVM 0x300)
OpenGL Version: 2.1 Mesa 8.0.4

▶ X-SERVER SCREEN INFORMATION:

Name of display: :0
Version number: 11.0
Vendor string: The X.Org Foundation
Vendor release number: 11204000
X.Org version: 1.12.4
Number of extensions: 25
BIG-REQUESTS
Composite
DAMAGE
DOUBLE-BUFFER
DPMS
DRI2
GLX
Generic Event Extension
MIT-SCREEN-SAVER
MIT-SHM
RANDR
RECORD
RENDER
SGI-GLX
SHAPE
SYNC
X-Resource
XC-MISC
XFIXES
XFree86-VidModeExtension
XINERAMA
XInputExtension
XKEYBOARD
XTEST
XVideo
Default screen number: 0
Number of screens: 1

Screen #0:
dimensions: 1368x768 pixels (351x191 millimeters)
resolution: 99x102 dots per inch
depths (7): 24, 1, 4, 8, 15, 16, 32
root window id: 0x131
depth of root window: 24 planes

Sound... hehe... it's a doozy.

Audio device [0403]: ATI Technologies Inc Device [1002:9840]
• Kernel Driver: snd_hda_intel
--
Audio device [0403]: Advanced Micro Devices [AMD] Hudson Azalia Controller [1022:780d] (rev 02)
• Kernel Driver: snd_hda_intel
• Memory Used: 21.34 KB
• Path: /lib/modules/3.10.32/kernel/sound/pci/hda/snd-hda-intel.ko
• Description: Intel HDA driver

Audio device [0403]: ATI Technologies Inc Device [1002:9840]
• Kernel Driver: snd_hda_intel
--
Audio device [0403]: Advanced Micro Devices [AMD] Hudson Azalia Controller [1022:780d] (rev 02)
• Kernel Driver: snd_hda_intel
• Memory Used: 21.34 KB
• Path: /lib/modules/3.10.32/kernel/sound/pci/hda/snd-hda-intel.ko
• Description: Intel HDA driver

!!################################
!!ALSA Information Script v 0.4.60
!!################################

!!Script ran on: Fri Apr 25 21:58:58 UTC 2014


!!Linux Distribution
!!------------------

Slacko Puppy Linux Linux 3.10.32 [i686 arch]


!!DMI Information
!!---------------

Manufacturer: Hewlett-Packard
Product Name: HP Pavilion 15 Notebook PC
Product Version: 0976110000405E00000620180


!!Kernel Information
!!------------------

Kernel release: 3.10.32
Operating System: GNU/Linux
Architecture: i686
Processor: AMD A6-5200 APU with Radeon(TM) HD Graphics
SMP Enabled: Yes


!!ALSA Version
!!------------

Driver version: k3.10.32
Library version:
Utilities version: 1.0.26


!!Loaded ALSA modules
!!-------------------

snd_hda_intel
snd_hda_intel


!!Sound Servers on this system
!!----------------------------

ESound Daemon:
Installed - Yes (/usr/bin/esd)
Running - No


!!Soundcards recognised by ALSA
!!-----------------------------

0 [Generic ]: HDA-Intel - HD-Audio Generic
HD-Audio Generic at 0xf0340000 irq 78
1 [Generic_1 ]: HDA-Intel - HD-Audio Generic
HD-Audio Generic at 0xf0344000 irq 79


!!PCI Soundcards installed in the system
!!--------------------------------------

00:01.1 Audio device: ATI Technologies Inc Device 9840
00:14.2 Audio device: Advanced Micro Devices [AMD] Hudson Azalia Controller (rev 02)


!!Advanced information - PCI Vendor/Device/Subsystem ID's
!!--------------------------------------------------------

00:01.1 0403: 1002:9840
Subsystem: 103c:216f
--
00:14.2 0403: 1022:780d (rev 02)
Subsystem: 103c:216f


!!Modprobe options (Sound related)
!!--------------------------------

snd_atiixp_modem: index=-2
snd_intel8x0m: index=-2
snd_via82xx_modem: index=-2
snd_usb_audio: index=-2
snd_usb_caiaq: index=-2
snd_usb_ua101: index=-2
snd_usb_us122l: index=-2
snd_usb_usx2y: index=-2
snd_cmipci: mpu_port=0x330 fm_port=0x388
snd_pcsp: index=-2
snd_usb_audio: index=-2


!!Loaded sound module options
!!--------------------------

!!Module: snd_hda_intel
align_buffer_size : -1
bdl_pos_adj : 32,32,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
beep_mode : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
enable_msi : -1
id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
jackpoll_ms : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
position_fix : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
power_save : 0
power_save_controller : Y
probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
single_cmd : N
snoop : Y

!!Module: snd_hda_intel
align_buffer_size : -1
bdl_pos_adj : 32,32,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
beep_mode : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
enable_msi : -1
id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
jackpoll_ms : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
position_fix : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
power_save : 0
power_save_controller : Y
probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
single_cmd : N
snoop : Y


!!HDA-Intel Codec information
!!---------------------------
--startcollapse--

Codec: ATI R6xx HDMI
Address: 0
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x1002aa01
Subsystem Id: 0x00aa0100
Revision Id: 0x100500
No Modem Function Group found
Default PCM:
rates [0x70]: 32000 44100 48000
bits [0x2]: 16
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
Power states: D0 D3 CLKSTOP EPSS
Power: setting=D0, actual=D0, Clock-stop-OK
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x02 [Audio Output] wcaps 0x221: Stereo Digital Stripe
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
IEC Coding Type: 0x0
Node 0x03 [Pin Complex] wcaps 0x400381: Stereo Digital
Control: name="HDMI/DP,pcm=3 Jack", index=0, device=0
Control: name="IEC958 Playback Con Mask", index=0, device=0
Control: name="IEC958 Playback Pro Mask", index=0, device=0
Control: name="IEC958 Playback Default", index=0, device=0
Control: name="IEC958 Playback Switch", index=0, device=0
Control: name="ELD", index=0, device=3
Pincap 0x00000094: OUT Detect HDMI
Pin Default 0x185600f0: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=01, enabled=1
Connection: 1
0x02
Node 0x04 [Audio Output] wcaps 0x221: Stereo Digital Stripe
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
IEC Coding Type: 0x0
Node 0x05 [Pin Complex] wcaps 0x400381: Stereo Digital
Pincap 0x00000094: OUT Detect HDMI
Pin Default 0x585600f0: [N/A] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x04
Node 0x06 [Audio Output] wcaps 0x221: Stereo Digital Stripe
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
IEC Coding Type: 0x0
Node 0x07 [Pin Complex] wcaps 0x400381: Stereo Digital
Pincap 0x00000094: OUT Detect HDMI
Pin Default 0x585600f0: [N/A] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x06
Codec: Realtek ALC282
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x10ec0282
Subsystem Id: 0x103c216f
Revision Id: 0x100003
No Modem Function Group found
Default PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
Power states: D0 D1 D2 D3 CLKSTOP EPSS
Power: setting=D0, actual=D0
GPIO: io=3, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Control: name="Speaker Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
Amp-Out vals: [0x57 0x57]
Converter: stream=8, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Control: name="Headphone Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Device: name="ALC282 Analog", type="Audio", device=0
Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
Amp-Out vals: [0x57 0x57]
Converter: stream=8, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x06 [Audio Output] wcaps 0x611: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Control: name="Capture Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Capture Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Device: name="ALC282 Analog", type="Audio", device=0
Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1
Amp-In vals: [0x80 0x80]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x23
Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1
Amp-In vals: [0x97 0x97]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x22
Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Control: name="Mic Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=1, ofs=0
Control: name="Mic Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=1, ofs=0
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 5
0x18 0x19 0x1a 0x1b 0x1d
Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x03 0x0b
Node 0x0e [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0f [Audio Mixer] wcaps 0x20010a: Mono Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00]
Connection: 1
0x0d
Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x11 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1
Amp-In vals: [0x80 0x80]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x12
Node 0x12 [Pin Complex] wcaps 0x40040b: Stereo Amp-In
Control: name="Internal Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Internal Mic Phantom Jack", index=0, device=0
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
Amp-In vals: [0x00 0x00]
Pincap 0x00000020: IN
Pin Default 0x99a30130: [Fixed] Mic at Int ATAPI
Conn = ATAPI, Color = Unknown
DefAssociation = 0x3, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Control: name="Speaker Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Speaker Phantom Jack", index=0, device=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x00010014: OUT EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x90170110: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x0c
Node 0x15 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x16 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x17 [Pin Complex] wcaps 0x40050c: Mono Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80]
Pincap 0x00000010: OUT
Pin Default 0x40020008: [N/A] Line Out at Ext N/A
Conn = 1/4, Color = Unknown
DefAssociation = 0x0, Sequence = 0x8
Pin-ctls: 0x00:
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x0f
Node 0x18 [Pin Complex] wcaps 0x40048b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
Amp-In vals: [0x00 0x00]
Pincap 0x00003724: IN Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x19 [Pin Complex] wcaps 0x40048b: Stereo Amp-In
Control: name="Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Mic Jack", index=0, device=0
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
Amp-In vals: [0x00 0x00]
Pincap 0x00003724: IN Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x03a11020: [Jack] Mic at Ext Left
Conn = 1/8, Color = Black
DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=02, enabled=1
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x1a [Pin Complex] wcaps 0x40048b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
Amp-In vals: [0x00 0x00]
Pincap 0x00003724: IN Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x1b [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000373c: IN OUT HP Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 2
0x0c* 0x0d
Node 0x1c [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x1d [Pin Complex] wcaps 0x400400: Mono
Pincap 0x00000020: IN
Pin Default 0x40e00001: [N/A] Reserved at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0x0, Sequence = 0x1
Pin-ctls: 0x20: IN
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x1e [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x06
Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
Processing caps: benign=0, ncoeff=117
Node 0x21 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Control: name="Headphone Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Headphone Jack", index=0, device=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0000001c: OUT HP Detect
Pin Default 0x03211040: [Jack] HP Out at Ext Left
Conn = 1/8, Color = Black
DefAssociation = 0x4, Sequence = 0x0
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=01, enabled=1
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 2
0x0c 0x0d*
Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 6
0x18 0x19 0x1a 0x1b 0x1d 0x0b
Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 6
0x18 0x19 0x1a 0x1b 0x1d 0x0b
--endcollapse--


!!ALSA Device nodes
!!-----------------

crw-rw---- 1 root audio 116, 4 Apr 26 2014 /dev/snd/controlC0
crw-rw---- 1 root audio 116, 8 Apr 26 2014 /dev/snd/controlC1
crw-rw---- 1 root audio 116, 3 Apr 26 2014 /dev/snd/hwC0D0
crw-rw---- 1 root audio 116, 7 Apr 26 2014 /dev/snd/hwC1D0
crw-rw---- 1 root audio 116, 2 Apr 26 2014 /dev/snd/pcmC0D3p
crw-rw---- 1 root audio 116, 6 Apr 26 2014 /dev/snd/pcmC1D0c
crw-rw---- 1 root audio 116, 5 Apr 26 05:41 /dev/snd/pcmC1D0p
crw-rw---- 1 root audio 116, 1 Apr 26 2014 /dev/snd/seq
crw-rw---- 1 root audio 116, 33 Apr 26 2014 /dev/snd/timer


!!ALSA configuration files
!!------------------------

!!System wide config file (/etc/asound.conf)

defaults.pcm.card 1
defaults.pcm.device 0


!!Aplay/Arecord output
!!------------

APLAY

**** List of PLAYBACK Hardware Devices ****
card 0: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Generic_1 [HD-Audio Generic], device 0: ALC282 Analog [ALC282 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0

ARECORD

**** List of CAPTURE Hardware Devices ****
card 1: Generic_1 [HD-Audio Generic], device 0: ALC282 Analog [ALC282 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0

!!Amixer output
!!-------------

!!-------Mixer controls for card 0 [Generic]

Card hw:0 'Generic'/'HD-Audio Generic at 0xf0340000 irq 78'
Mixer name : 'ATI R6xx HDMI'
Components : 'HDA:1002aa01,00aa0100,00100500'
Controls : 7
Simple ctrls : 1
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]

!!-------Mixer controls for card 1 [Generic_1]

Card hw:1 'Generic_1'/'HD-Audio Generic at 0xf0344000 irq 79'
Mixer name : 'Realtek ALC282'
Components : 'HDA:10ec0282,103c216f,00100003'
Controls : 21
Simple ctrls : 10
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 87
Mono: Playback 87 [100%] [0.00dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 87
Mono:
Front Left: Playback 87 [100%] [0.00dB] [on]
Front Right: Playback 87 [100%] [0.00dB] [on]
Simple mixer control 'Speaker',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 87
Mono:
Front Left: Playback 87 [100%] [0.00dB] [on]
Front Right: Playback 87 [100%] [0.00dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 255 [100%] [0.00dB]
Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Mic',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [off]
Front Right: Playback 0 [0%] [-34.50dB] [on]
Simple mixer control 'Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 63
Front Left: Capture 0 [0%] [-17.25dB] [off]
Front Right: Capture 0 [0%] [-17.25dB] [off]
Simple mixer control 'Auto-Mute Mode',0
Capabilities: enum
Items: 'Disabled' 'Enabled'
Item0: 'Disabled'
Simple mixer control 'Digital',0
Capabilities: cvolume
Capture channels: Front Left - Front Right
Limits: Capture 0 - 120
Front Left: Capture 60 [50%] [0.00dB]
Front Right: Capture 60 [50%] [0.00dB]
Simple mixer control 'Internal Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]


!!Alsactl output
!!-------------

--startcollapse--
state.Generic {
control.1 {
iface CARD
name 'HDMI/DP,pcm=3 Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.2 {
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.3 {
iface MIXER
name 'IEC958 Playback Pro Mask'
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.4 {
iface MIXER
name 'IEC958 Playback Default'
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
}
}
control.5 {
iface MIXER
name 'IEC958 Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.6 {
iface PCM
device 3
name ELD
value ''
comment {
access 'read volatile'
type BYTES
count 0
}
}
control.7 {
iface PCM
device 3
name 'Playback Channel Map'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 36'
}
}
}
state.Generic_1 {
control.1 {
iface MIXER
name 'Headphone Playback Volume'
value.0 87
value.1 87
comment {
access 'read write'
type INTEGER
count 2
range '0 - 87'
dbmin -6525
dbmax 0
dbvalue.0 0
dbvalue.1 0
}
}
control.2 {
iface MIXER
name 'Headphone Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.3 {
iface MIXER
name 'Speaker Playback Volume'
value.0 87
value.1 87
comment {
access 'read write'
type INTEGER
count 2
range '0 - 87'
dbmin -6525
dbmax 0
dbvalue.0 0
dbvalue.1 0
}
}
control.4 {
iface MIXER
name 'Speaker Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.5 {
iface MIXER
name 'Mic Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 -3450
dbvalue.1 -3450
}
}
control.6 {
iface MIXER
name 'Mic Playback Switch'
value.0 false
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.7 {
iface MIXER
name 'Auto-Mute Mode'
value Disabled
comment {
access 'read write'
type ENUMERATED
count 1
item.0 Disabled
item.1 Enabled
}
}
control.8 {
iface MIXER
name 'Capture Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 63'
dbmin -1725
dbmax 3000
dbvalue.0 -1725
dbvalue.1 -1725
}
}
control.9 {
iface MIXER
name 'Capture Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.10 {
iface MIXER
name 'Mic Boost Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 3'
dbmin 0
dbmax 3600
dbvalue.0 0
dbvalue.1 0
}
}
control.11 {
iface MIXER
name 'Internal Mic Boost Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 3'
dbmin 0
dbmax 3600
dbvalue.0 0
dbvalue.1 0
}
}
control.12 {
iface MIXER
name 'Master Playback Volume'
value 87
comment {
access 'read write'
type INTEGER
count 1
range '0 - 87'
dbmin -6525
dbmax 0
dbvalue.0 0
}
}
control.13 {
iface MIXER
name 'Master Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.14 {
iface CARD
name 'Mic Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.15 {
iface CARD
name 'Internal Mic Phantom Jack'
value true
comment {
access read
type BOOLEAN
count 1
}
}
control.16 {
iface CARD
name 'Headphone Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.17 {
iface CARD
name 'Speaker Phantom Jack'
value true
comment {
access read
type BOOLEAN
count 1
}
}
control.18 {
iface PCM
name 'Playback Channel Map'
value.0 0
value.1 0
comment {
access read
type INTEGER
count 2
range '0 - 36'
}
}
control.19 {
iface PCM
name 'Capture Channel Map'
value.0 0
value.1 0
comment {
access read
type INTEGER
count 2
range '0 - 36'
}
}
control.20 {
iface MIXER
name 'PCM Playback Volume'
value.0 255
value.1 255
comment {
access 'read write user'
type INTEGER
count 2
range '0 - 255'
tlv '0000000100000008ffffec1400000014'
dbmin -5100
dbmax 0
dbvalue.0 0
dbvalue.1 0
}
}
control.21 {
iface MIXER
name 'Digital Capture Volume'
value.0 60
value.1 60
comment {
access 'read write user'
type INTEGER
count 2
range '0 - 120'
tlv '0000000100000008fffff44800000032'
dbmin -3000
dbmax 3000
dbvalue.0 0
dbvalue.1 0
}
}
}
--endcollapse--


!!All Loaded Modules
!!------------------

Module
cpufreq_ondemand
acpi_cpufreq
mperf
iptable_mangle
iptable_nat
nf_nat_ipv4
nf_nat
ipt_REJECT
nf_conntrack_ftp
nf_conntrack_irc
iptable_filter
xt_state
nf_conntrack_ipv4
nf_defrag_ipv4
nf_conntrack
ip_tables
arc4
rtl8188ee
rtlwifi
mac80211
wl
lib80211
cfg80211
fan
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
videodev
media
sg
rtsx_pci_sdmmc
mmc_core
pcspkr
rtsx_pci_ms
memstick
rtsx_pci
r8169
fam15h_power
k10temp
i2c_piix4
i2c_core
snd_hda_codec_realtek
snd_hda_codec_hdmi
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm_oss
snd_mixer_oss
snd_pcm
snd_seq_dummy
snd_page_alloc
snd_seq_oss
snd_seq_midi
snd_seq_midi_event
snd_rawmidi
snd_seq
shpchp
snd_seq_device
snd_timer
snd
soundcore
hp_wmi
sparse_keymap
rfkill
wmi
battery
thermal
video
joydev
evdev
button
processor
thermal_sys
hwmon
hp_accel
lis3lv02d
input_polldev
ac
fbcon
bitblit
softcursor
font
tileblit
fuse
aufs
squashfs


!!Sysfs Files
!!-----------

/sys/class/sound/hwC0D0/init_pin_configs:
0x03 0x185600f0
0x05 0x585600f0
0x07 0x585600f0

/sys/class/sound/hwC0D0/driver_pin_configs:

/sys/class/sound/hwC0D0/user_pin_configs:

/sys/class/sound/hwC0D0/init_verbs:

/sys/class/sound/hwC1D0/init_pin_configs:
0x12 0x99a30130
0x14 0x90170110
0x17 0x40020008
0x18 0x411111f0
0x19 0x03a11020
0x1a 0x411111f0
0x1b 0x411111f0
0x1d 0x40e00001
0x1e 0x411111f0
0x21 0x03211040

/sys/class/sound/hwC1D0/driver_pin_configs:

/sys/class/sound/hwC1D0/user_pin_configs:

/sys/class/sound/hwC1D0/init_verbs:


!!ALSA/HDA dmesg
!!------------------

[ 23.473001] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 23.553228] snd_hda_intel 0000:00:01.1: irq 78 for MSI/MSI-X
[ 23.564304] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input9
[ 23.564890] snd_hda_intel 0000:00:14.2: irq 79 for MSI/MSI-X
[ 23.587767] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[ 23.587864] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[ 23.661810] ACPI Warning: 0x00000b00-0x00000b07 SystemIO conflicts with Region \_SB_.PCI0.SMBS.SMB0 1 (20130328/utaddress-251)

Sorry if I ruined your day. But everything works except ffmeg.

[proebler]

hi,

I posted about an apparent conflict between Parcellite clipboard manager and Figaro's fpm2 password manager way back in 2012 :
http://www.murga-linux.com/puppy/viewto ... &start=510

I now encounter the situation again with Slacko-5.7 , running frugally from USB.
Again it appears that Parcellite running by default on start up is preventing use of the primary selection [middle click paste] with fpm2.

I have removed /root/.config/autostart/parcellite.desktop to overcome the problem.
However, I still think that perhaps this should be dealt with in an other way, as it is rather confusing when fpm2 is not working as one expects it to.
Also the potential security issue, which I mentioned in the earlier post on the subject, probably is still the same now as it was then.

cheers
proebler

[DigsInDirt]

Greetings, All.

First to Micko and all who haved helped with Slacko, thank you for a great distribution.

I'm much more of a Windows user that Linux, so let me know if you need more information.

I was at a McDonald's restaurant last night, with my HP NC6400 laptop. Starting from a Slacko 5.7 on CD, with a frugal install to a Fat32 data partition. The HP has 1GB of Ram, a dual core processor, with a Intel Pro/Wireless ABG wireless adapter. Slacko 5.7 seems to run very well in general.

At home, I connect to my Galaxy Tab 3G used as a hotspot. Slacko 5.7 connects well using the default Simple Network Setup.

At McDonald's, the Simple Network Setup picked up the AT&T Wifi, showed no encryption, and when I clicked on 'Connect' , just hung, saying something like "waiting".

I didn't have any luck with Frisbee, either.

I then tried the "Network Wizard" which I had used with older versions of Puppy and I connected to the network with out any further problems.

I had a means of booting Slacko 5.6 with me, so I rebooted my laptop and started Slacko 5.6. The Simple Network Setup found the AT&T wifi and connected to it without any issues.

Back to the tomato plants for now.

Digs In Dirt

[SFR]

Re: "something's wrong with CURL" raised here.

I just complied the latest development version (for the upcoming 7.37.0) from git:
https://github.com/bagder/curl
and the problem is gone - everything works as it should.

Greetings!