Lupu-515 Beta New Version DEC 18

[playdayz]

Doesn't the current .pet format support installation scripts? Can't you just keep the standard mode as Xv and add
Code:
mv /root/.mplayer/config /root/.mplayer/config.bak
cat /root/.mplayer/config.bak | sed s/'x11'/'xv'/g > /root/.mplayer/config

This is on thelist to implement and test, but this problem with the sound came up.

[playdayz]

Wot no mtpaint or screen capture in the menu?
I did the above in inkscapelite
could not export - so looked for screen capture
Not in menu
Had to run from mtpaint directly . . .
no mtpaint in menu either . . .

I hurried the luci-241 because of the sound issue. Sorry.

[abushcrafter]

Barry, why don't you move the ALSA stuff to delayed run or xinitrc? After all, sound is needed once you get to the desktop, not earlier. Of course, there are rear-corner cases, such as pfix=nox fans ... but this code could be placed pretty much anywhere. Even /etc/profile is good enough.

In fact, /etc/profile is a good location - it runs when the shell starts, so if the code goes there, it's the first thing that runs after inittab.

Please don't do that because then one does not have the option of having startup sounds before X has loaded/run. That works well for startup sounds like "Initiating Startup Sequence"

[rjbrewer]

700m dell.

Luci240

Ran alsa config; deleted 10alsa file (full install), sound is okay now
after reboots.

[ttuuxxx]

I hurried the luci-241 because of the sound issue. Sorry.

Just wondering why none of my packages were included, same thing ? or just for repo?
ttuuxxx

[Terryphi]

Since upgrading from Luci240 to 241 Osmo immediately crashed on opening. Reverting to previous libdbus-glib-1.so.2.1.0 solves problem.

[James C]

for those with reboot sound issues, and those without,
..please run this in a terminal (NOT in full installs, unless you backup the file first) only in luci-241 and 240.

Code: Select all

 rm -f /etc/init.d/10alsa

*reboot
*report success or failure

if you need to restore.. ie- fails (frugal types only, usb included) type:

Code: Select all

cp -f /initrd/pup_ro2/etc/init.d/10alsa /etc/init.d/10alsa

Cheers

(note, it isn't the correct fix as woof goes, but it may have to do)

Works fine on my frugal install of 241......already rebooted several times and sound has been persistent.
Now to try this in my Luci-241 Trinity install.....

[Jades]

for those with reboot sound issues, and those without,
..please run this in a terminal (NOT in full installs, unless you backup the file first) only in luci-241 and 240.

Code: Select all

 rm -f /etc/init.d/10alsa

*reboot
*report success or failure

Right, just checked this on Luci 241. I ran ALSA Sound Wizard first, then entered the command in the console. Both of my machines retained sound after rebooting.

[playdayz]

Removing 10alsa also solves my problem of the volume levels being changed--even though it wasn't all the way muted.

[James C]

Solved the sound muting problem in Luci-241 w/ Trinity too.

[Jim1911]

Had low sound on startup, adjusted retrovol settings as shown which gives great sound on my hardware.

Rebooted, all settings on retrovol were at zero except master which was at 100%. Sound level very low. Readjusted retrovol settings, executed

Code: Select all

rm -f /etc/init.d/10alsa 

in a console and rebooted. Retrovol settings were retained. Your code did the job.

Overall, luci-241 looks great.

Thanks,
Jim

[playdayz]

Overall, luci-241 looks great.

Except for all the stuff I forgot in a hurry to get it out

No worries. FYI, When the Woof settles, then our next version, should be luci-242, will be a feature freeze. That means nothing but bug fixes until release. Previously we have frozen about 2-3 weeks before release. This time we hope for 2 weeks. IMHO that is very important for quality control.

[Jim1911]

Will renaming luci_devx_239.sfs to 241 work?

Thanks,
Jim

[playdayz]

Will renaming luci_devx_239.sfs to 241 work?

Yes.
-------------------------------------------------------------------
mtpaint deserves special treatment now, since I left it off the menu.
There is a nice new pet with the NLS support and another nice new pet with the HTML documentation. They should work for the version 3.34.57 in lcui-241. The menu items will return in luci-242.

http://distro.ibiblio.org/pub/linux/dis ... -lucid.pet

http://distro.ibiblio.org/pub/linux/dis ... -lucid.pet

[playdayz]

Since upgrading from Luci240 to 241 Osmo immediately crashed on opening. Reverting to previous libdbus-glib-1.so.2.1.0 solves problem.

Terryphi, Had you installed anything else? In luci-241, Osmo works for me.

[James C]

Since upgrading from Luci240 to 241 Osmo immediately crashed on opening. Reverting to previous libdbus-glib-1.so.2.1.0 solves problem.

Terryphi, Had you installed anything else? In luci-241, Osmo works for me.

Appears to be working normally here in 241 as well.

[playdayz]

A couple of people have reported inconsistencies in disk space reported in Partview, if anyone could pursue that. Thanks.

[Jim1911]

Fresh full hd installation of luci-241 had a few minor problems.

1. The code 01micko posted corrected the low volume situation.

2. Problems that are only present with full hd installation:

• a. Default media player opens but will not play. To correct, I changed default to VLC.
  
  b. Personalize Setting does not come up on initial boot. When tried from the menu, it would not open on first try. Subsequent trys, it opens and works properly.

Cheers,
Jim

[yarddog]

Removing 10alsa also solves my problem of the volume levels being changed--even though it wasn't all the way muted.

removed 10alsa and solved my problem also
keep on keepin on - good work guys

regards
yarddog

[Tasgarth]

Since upgrading from Luci240 to 241 Osmo immediately crashed on opening.

Osmo works for me. No problem ( CD-Live and pupsave).