pBurn 4.3.19

Message

#1081 Post by **BÃ©Ã¨m** » Thu 28 Jan 2010, 14:07

disciple wrote:http://www.murga-linux.com/puppy/viewto ... 887#164887
Looks like there is no Dutch... perhaps you can translate it

Indeed looks there is no Dutch translation.
Not that I mind, as I would prefer a uk_BE locale, but that doesn't exist.

@Zigbert
But for the sake of other users I might have a look at the to be translated files. I hope that nls.pet don't ruin my installed PBurn. I would have preferred the to be translated files separately, as I have no need to auto-upgrade to the nls language. I would prefer, as in other programs, to have an option to switch the language.

zigbert · #1082 Post by **zigbert** » Thu 28 Jan 2010, 17:40

The nls won't ruin anything. You can use preferences to switch between auto selected language (depends on your $LANG variable), or manually select one of the installed languages.

#1083 Post by **BÃ©Ã¨m** » Thu 28 Jan 2010, 20:00

zigbert wrote:The nls won't ruin anything. You can use preferences to switch between auto selected language (depends on your $LANG variable), or manually select one of the installed languages.

Thank you Zigbert for reassuring me.
I'll install the pet and if time permits will do the translation to Dutch.
I'll PM you when done.

bugman · #1084 Post by **bugman** » Mon 01 Feb 2010, 23:38

so, as mentioned in this thread

http://www.murga-linux.com/puppy/viewtopic.php?t=51970

does this new version actually burn discs all the way through?

my problem is definitely a software problem, but i am not sure if it is a buggy pburn in 4.31 or the new kernel not liking my old burner

zigbert · #1085 Post by **zigbert** » Tue 02 Feb 2010, 06:16

bugman
I have followed your thread, but I don't have the answer of your question. I see you're not alone, so it would be good to get the grip of this...... It should be fairly easy to find out if it is the fault of Pburn, since you tell in the other post that Pburn used to work in Puppy 4.12. What Pburn version could it be.....hmmmm.....I don't remember, maybe 2.0.8.....? I have every release in my archive, so you can test whichever you want to.

Thanks for reporting
Sigmund

bugman · #1086 Post by **bugman** » Tue 02 Feb 2010, 11:26

i'd love to test different versions, but my blank disc budget is zero for a while

my next test will be--does grafburn work correctly in 4.31, then i will know if it is pburn or the kernel

i have had hardware problems with kernel upgrades in the past which is why i am like a dog with a bone about it

[and i will give the 3.18 pburn a spin]

zigbert · #1087 Post by **zigbert** » Tue 02 Feb 2010, 12:43

if Grafburn works for you, will you then please test Pburn using the -f switch (pburn -f). This intends to use the same storage approach as Grafburn. See 'pburn -h' for more info.

Sigmund

zigbert · #1088 Post by **zigbert** » Wed 03 Feb 2010, 10:40

Version 3.1.9
See main post

Changelog
- Bugfix: Check whether a CD is inserted before trying to 'Verify CD quality'. (thanks to disciple)
- Bugfix: Open iso from rox (-m iso) run installation every time
- Bugfix: Set cpu priority (nice)
- Bugfix: Audio-CD: Check if valid disc is inserted
- Bugfix: Navigation in right pane --> Required media-size showed less than actually needed.

esmourguit · #1089 Post by **esmourguit** » Thu 04 Feb 2010, 09:10

Bonjour à tous,

It seems that the Help file does not work in the right language when the language is set to Auto.
If the language is set to French in preferences, for example, Pburn can't load. He remains stuck on the splash screen.

Cordialement

MattN · #1090 Post by **MattN** » Mon 08 Feb 2010, 05:30

I have run into a problem with pburn that is really getting to me -- I can't even erase a cd-rw disc. I get an error and got the following error log:

Pburn version 3.1.9

###################################################
COMMAND:
###################################################

cdrecord blank=all -v dev=/dev/sr0 driveropts=burnfree

###################################################
OUTPUT:
###################################################
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.9
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 1 = CD-ROM
Driveropts: 'burnfree'
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'TSSTcorp'
Identification : 'CDDVDW SH-S223B '
Revision : 'SB01'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A (CD-RW)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW) (current)
Profile: 0x0009 (CD-R)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1962752 = 1916 KB
Speed set to 706 KB/s
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Reference speed: 2
Is not unrestricted
Is erasable
ATIP start of lead in: -11745 (97:25/30)
ATIP start of lead out: 359363 (79:53/38)
1T speed low: 0 (reserved val 0) 1T speed high: 4
2T speed low: 8 2T speed high: 0 (reserved val 10)
power mult factor: 4 6
recommended erase/write power: 5
A1 values: 02 4C D0
A2 values: 4A D8 5A
Disk type: Phase change
Manuf. index: 40
Manufacturer: INFODISC Technology Co., Ltd.
Starting to write CD/DVD at speed 4.0 in real BLANK mode for single session.
Last chance to quit, starting real write in 4 seconds. 3 seconds. 2 seconds. 1 seconds. 0 seconds. Operation starts.
Performing OPC...
Blanking entire disk
Errno: 5 (Input/output error), blank unit scsi sendcmd: no error
CDB: A1 00 00 00 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 51 00 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x51 Qual 0x00 (erase failure) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 13.398s timeout 9600s
wodim: Cannot blank disk, aborting.

I would appreciate any help in getting this to work.

MattN

WB7ODYFred · #1091 Post by **WB7ODYFred** » Fri 05 Mar 2010, 05:03

Nearly the same error as above.
Use command below, has same problem error out with out writing to CD-R disk.

pburn -f -m audio -g cdrtools

Sorry for the long listing, Zigbert.

Pburn version 3.1.9

###################################################
COMMAND:
###################################################
cd "/root/.pburn/pburn_tmp/"
ffmpeg -i 01_The_Moody_Blues_-_I_Know_Youre_Out_There_Somewh.mp3 -ac 2 -ar 44100 -y 01_The_Moody_Blues_-_I_Know_Youre_Out_There_Somewh_pburn.wav
ffmpeg -i 02_ZZ_Top_-_Stages.mp3 -ac 2 -ar 44100 -y 02_ZZ_Top_-_Stages_pburn.wav
ffmpeg -i 03_Brooks_and_Dunn_-_My_Maria.mp3 -ac 2 -ar 44100 -y 03_Brooks_and_Dunn_-_My_Maria_pburn.wav
ffmpeg -i 04_Janet_Jackson_-_Control.mp3 -ac 2 -ar 44100 -y 04_Janet_Jackson_-_Control_pburn.wav
ffmpeg -i 05_01_-_Orianthi_-_According_To_You.mp3 -ac 2 -ar 44100 -y 05_01_-_Orianthi_-_According_To_You_pburn.wav
ffmpeg -i 06_Justin_Timberlake_-_Rock_Your_Body.mp3 -ac 2 -ar 44100 -y 06_Justin_Timberlake_-_Rock_Your_Body_pburn.wav
cdrecord -v dev=/dev/sr0 driveropts=burnfree -pad -dao -useinfo -text /root/.pburn/pburn_tmp/*_pburn.wav

###################################################
OUTPUT:
###################################################
FFmpeg version SVN-r21005, Copyright (c) 2000-2010 Fabrice Bellard, et al.
built on Jan 4 2010 02:24:24 with gcc 4.4.2
configuration: --prefix=/usr --enable-libfaad --enable-libmp3lame --enable-libschroedinger --enable-libtheora --enable-libx264 --enable-libxvid --enable-libvorbis --enable-gpl --enable-x11grab --enable-pthreads --enable-postproc --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-version3 --enable-shared --enable-avfilter --enable-avfilter-lavf
libavutil 50. 7. 0 / 50. 7. 0
libavcodec 52.45. 0 / 52.45. 0
libavformat 52.46. 0 / 52.46. 0
libavdevice 52. 2. 0 / 52. 2. 0
libavfilter 1.12. 0 / 1.12. 0
libswscale 0. 7. 2 / 0. 7. 2
libpostproc 51. 2. 0 / 51. 2. 0
[mp3 @ 0x806a390]max_analyze_duration reached
[mp3 @ 0x806a390]Estimating duration from bitrate, this may be inaccurate
Input #0, mp3, from '01_The_Moody_Blues_-_I_Know_Youre_Out_There_Somewh.mp3':

size= 46144kB time=267.96 bitrate=1410.7kbits/s
Error while decoding stream #0.0
size= 46395kB time=269.32 bitrate=1411.2kbits/s

video:0kB audio:46395kB global headers:0kB muxing overhead 0.000093%
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.9
SCSI buffer size: 64512
wodim: Warning: controller returns wrong size for CD capabilities page.
wodim: Warning: controller returns wrong size for CD capabilities page.
wodim: Warning: controller returns wrong size for CD capabilities page.
wodim: Warning: controller returns wrong size for CD capabilities page.
wodim: Warning: controller returns wrong size for CD capabilities page.
wodim: Warning: controller returns wrong size for CD capabilities page.
wodim: Warning: controller returns wrong size for CD write parameter page.
wodim: Warning: controller returns wrong size for CD write parameter page.
wodim: Warning: controller returns wrong size for CD write parameter page.
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 0 = CD-DA
Driveropts: 'burnfree'
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'LG '
Identification : 'CD-RW CED-8042B '
Revision : '1.07'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC SWABAUDIO
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1024000 = 1000 KB
FIFO size : 12582912 = 12288 KB
wodim: Warning: controller returns wrong size for CD write parameter page.
wodim: Warning: controller returns wrong size for CD write parameter page.
wodim: Warning: controller returns wrong size for CD write parameter page.
wodim: Warning: controller returns wrong size for CD write parameter page.
wodim: Warning: controller returns wrong size for CD capabilities page.
wodim: Warning: controller returns wrong size for CD capabilities page.
Speed set to 706 KB/s
pregap1: -1
Track 01: audio 66 MB (06:36.61) no preemp pad
Track 02: audio 36 MB (03:35.09) no preemp pad
Track 03: audio 35 MB (03:31.06) no preemp pad
Track 04: audio 59 MB (05:53.95) no preemp pad
Track 05: audio 33 MB (03:19.20) no preemp pad
Track 06: audio 45 MB (04:29.32) no preemp pad
Total size: 276 MB (27:25.30) = 123398 sectors
Lout start: 277 MB (27:27/23) = 123398 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 6
Is not unrestricted
Is not erasable
Disk sub type: Medium Type C, low Beta category (C-) (6)
ATIP start of lead in: -11231 (97:32/19)
ATIP start of lead out: 359846 (79:59/71)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 27
Manufacturer: Prodisc Technology Inc.
Blocks total: 359846 Blocks current: 359846 Blocks remaining: 236448
Starting to write CD/DVD at speed 4.0 in real SAO mode for single session.
Last chance to quit, starting real write in 4 seconds. 3 seconds. 2 seconds. 1 seconds. 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... wodim: Warning: controller returns wrong size for CD write parameter page.
wodim: Warning: controller returns wrong size for CD write parameter page.
input buffer ready.
Performing OPC...
Sending CUE sheet...
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB: 2A 00 FF FF D4 21 00 02 A0 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 64 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x64 Qual 0x00 (illegal mode for this track) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.002s timeout 200s
wodim: Could not write Lead-in.
SAO startsec: -11231
Writing lead-in...
write CD-Text data: error after 0 bytes
Writing time: 0.038s
wodim: fifo had 192 puts and 0 gets.
wodim: fifo was 0 times empty and 0 times full, min fill was 100%.

zigbert · #1092 Post by **zigbert** » Fri 05 Mar 2010, 07:41

WB7ODYFred
I don't know the answer, but you have set your burner to write CD-text information. Not all burners are happy with that. It could be worth trying to burn without....

Sigmund

disciple · #1093 Post by **disciple** » Fri 05 Mar 2010, 22:29

Those are both problems with the backend, not Pburn itself. Have you guys googled the error messages?

WB7ODYFred - you are trying to use the cdrtools burn engine, but the error message indicates that it is still using wodim (presumably your cdrecord is just a link to wodim). Puppy does not include cdrtools - you need to install it.

edoc · #1094 Post by **edoc** » Sat 06 Mar 2010, 02:29

disciple wrote:Puppy does not include cdrtools - you need to install it.

When I go to Puppy Package Manager it says next to cdrtools that Puppy 4 had cdrkit (better).

I have 4.31 loaded on this laptop and cannot get it to mount and burn.

Should I go ahead and load cdrtools?

Do I want version a36 or a61-pup4?

Thanks!

disciple · #1095 Post by **disciple** » Sat 06 Mar 2010, 02:44

AFAICT cdrtools is better maintained and... better.
With problems like these guys are experiencing I think it is definitely worth trying cdrtools.
What exactly do you mean when you say you "cannot get it to mount and burn"? Can you neither mount a CD data disc nor burn a disc? If so I don't think cdrtools will help - I imagine you have a faulty CD drive or motherboard or something, or maybe your kernel or kernel modules don't work with your hardware.

edoc · #1096 Post by **edoc** » Sat 06 Mar 2010, 03:01

Hardware Info sees it:

-SCSI Disks-
MATSHITA UJDA150

PMount sees it as well, but won't mount it.

I can access a CD with audio files.

I can access an ISO CD (which happens to have Puppy 4.30 on it).

But a blank CD-R (I tried TDK and Maxell brands) is not recognized.

WDYT?

disciple · #1097 Post by **disciple** » Sat 06 Mar 2010, 03:14

What can't Pmount mount? A blank disk? You can't mount blank disks, so that is expected.
It sounds like you don't have any problems reading discs, just burning them.
What error message do you get when you try to burn a disk?

Do I want version a36 or a61-pup4?

I think it is pretty unlikely that one version will work for you and the other not.
a61 seems to be newer, so I'd try that... or even see if there is a newer version on the forum.

disciple · #1098 Post by **disciple** » Sat 06 Mar 2010, 03:18

Are you sure that drive is a CD burner? I think it might just read CDs, not write them.

edoc · #1099 Post by **edoc** » Sat 06 Mar 2010, 03:18

Pburn says "No disc inserted - Added; 0 Mb"

I have opened and closed the drive with the blank CD-R in it and no joy.

Very weird since everything else, except Burniso2cd and Pburn, seems to address the drive OK.

edoc · #1100 Post by **edoc** » Sat 06 Mar 2010, 03:22

disciple wrote:Are you sure that drive is a CD burner? I think it might just read CDs, not write them.

That is an interesting question - this is my backup/spare laptop as my ACER was away for service and my need to burn a CD is to load Puppy back on it (they replaced the HDD).

I thought the MATSHITA UJDA150 was a CD-RW but maybe not. Hmmmm. Maybe I mistakenly put the CD-RW in my son's laptop and the CD-Read Only i this one? Hmmmmm.

(old)Puppy Linux Discussion Forum

(old)Puppy Linux Discussion Forum

pBurn 4.3.19

pburn

PBurn 3.1.9 error, won't write ATP lead in