Hi,
Tried to compile Fujitsu Stylistic Tablet PC input driver for the Xorg called xf86-input-fpit-1.3.0, but autogen.sh failed with:
./configure: line 19707: syntax error near unexpected token `RANDR,'
./configure: line 19707: `XORG_DRIVER_CHECK_EXT(RANDR, randrproto)'
Can anyone help?
What could be the problem?
See attached.
Regards, Robert
FPIT - Fujitsu Stylistic input driver for the Xorg
-
- Posts: 9
- Joined: Thu 10 Dec 2009, 12:45
FPIT - Fujitsu Stylistic input driver for the Xorg
- Attachments
-
- autogen.sh.out.tar.gz
- xf86-input-fpit-1.3.0 Tablet PC input driver for the Xorg autogen output.
- (1.26 KiB) Downloaded 1496 times
-
- Posts: 5464
- Joined: Fri 10 Jun 2005, 05:12
- Location: Australia
You probably don't have the Xorg 7.3 sources installed.
But there's no need to compile the fpit Xorg input module.
It's already included within the full Xorg dotpet package -
http://distro.ibiblio.org/pub/linux/dis ... ri-7.3.pet
But there's no need to compile the fpit Xorg input module.
It's already included within the full Xorg dotpet package -
http://distro.ibiblio.org/pub/linux/dis ... ri-7.3.pet
-
- Posts: 9
- Joined: Thu 10 Dec 2009, 12:45
Hi Tempestuous,
Thank you very much for your helpful answer.
By the time you've answered I compiled the fpit.
You were right I needed the xorg source.
So Fujitsu Stylistic c500 works fine with fpit and Puppy 431.
I'm happy now:))
Thanks again,
Robert
Thank you very much for your helpful answer.
By the time you've answered I compiled the fpit.
You were right I needed the xorg source.
So Fujitsu Stylistic c500 works fine with fpit and Puppy 431.
I'm happy now:))
Thanks again,
Robert
- Attachments
-
- fpit_drv.zip
- (20.79 KiB) Downloaded 1477 times
-
- Posts: 9
- Joined: Thu 10 Dec 2009, 12:45
Fujitsu Stylistic c500 touchscreen on Puppy 431
Hi,
Puppy is excellent!
Fujitsu Stylistic c500 touchscreen works fine with fpit and Puppy 431.
1. First intsall Puppy with xorg.
2. Copy attached rc.local file to /etc/rc.d/
3. Copy attached xorg.conf file to /etc/X11/
4. Copy attached fpit_drv.so file to /usr/X11R7/lib/xorg/modules/input/
5. shutdown and restart (save changes if Puppy not installed)
Additionally you should install xvkbd the virtual keyboard for xorg see my next comment.
Enjoy Puppy
Robert1968 at gmail
Puppy is excellent!
Fujitsu Stylistic c500 touchscreen works fine with fpit and Puppy 431.
1. First intsall Puppy with xorg.
2. Copy attached rc.local file to /etc/rc.d/
3. Copy attached xorg.conf file to /etc/X11/
4. Copy attached fpit_drv.so file to /usr/X11R7/lib/xorg/modules/input/
5. shutdown and restart (save changes if Puppy not installed)
Additionally you should install xvkbd the virtual keyboard for xorg see my next comment.
Enjoy Puppy
Robert1968 at gmail
- Attachments
-
- xorg.zip
- Xorg configuration.
- (1.99 KiB) Downloaded 1635 times
-
- rc.local.zip
- Setserial autostart script.
- (291 Bytes) Downloaded 1596 times
-
- fpit_drv.zip
- touchscreen driver for fujitsu c500
- (20.79 KiB) Downloaded 1594 times
-
- Posts: 9
- Joined: Thu 10 Dec 2009, 12:45
xvkbd - virtual keyboard for xorg
Hi,
Puppy 431 has working xvkbd package.
1.) Install the following 3 attached pet file.
2.) open a console and type xvkbd.
3.) To autostart xvkbd after boot, open a console and type:
ln -s /usr/X11R7/bin/xvkbd /root/Startup/xvkbd
Thats it.
Regards,
Robert
http://www.murga-linux.com/puppy/viewtopic.php?p=262267 and
http://www.murga-linux.com/puppy/viewto ... 1043930508
Puppy 431 has working xvkbd package.
1.) Install the following 3 attached pet file.
2.) open a console and type xvkbd.
3.) To autostart xvkbd after boot, open a console and type:
ln -s /usr/X11R7/bin/xvkbd /root/Startup/xvkbd
Thats it.
Regards,
Robert
http://www.murga-linux.com/puppy/viewtopic.php?p=262267 and
http://www.murga-linux.com/puppy/viewto ... 1043930508
- Attachments
-
- xvkbd-3.0.pet.zip
- xvkbd
- (48.73 KiB) Downloaded 1617 times
-
- libXp.so.6-i486.pet.zip
- lib2
- (12.15 KiB) Downloaded 1615 times
-
- libXaw3d.so.8.pet.zip
- lib
- (108.3 KiB) Downloaded 1520 times
Hi All
Is anyone still using a C-500 with puppy linux? I just tried lupu-528.005 and the fpit driver was compiled against X11 V4 and it uses V7! I then tried slackp-5.3.3.3-4g and it doesn't have the driver included.
I am using an old version of ubuntu currently that works fine but can't get the latest version to work so I'm looking at any alternative to get current.
TIA
charles
Is anyone still using a C-500 with puppy linux? I just tried lupu-528.005 and the fpit driver was compiled against X11 V4 and it uses V7! I then tried slackp-5.3.3.3-4g and it doesn't have the driver included.
I am using an old version of ubuntu currently that works fine but can't get the latest version to work so I'm looking at any alternative to get current.
TIA
charles