Wow nic007remastering suite in a 12k sfs
Thats a great find... and colorful .
I 'll definitely never become a coder,but do take a peek at all scripts,
and usually get dizzy....

Made my day. + Utopic mad thing...think a will stop at my local SQDC today...

off topic....***some would say more;Utopic............
***dream dream...or lets be civilized modern "caveman"
*** no more economic $ystem exi$t... in dictionnaries, its defined as: not used anymore...
*** you trade,you share,you beg,you steal,you give >>>to or with/from whoever is your/their need ...

Thanks rockedge,you triggered it...i'll take a look at nic007 work.
A "X64 realtime machines operation puppy' would/could ;
-be,free of industrial usage-pompous-pretention ..which anyhow are usualy proprietary thing$.***..next post...
-be internet disabled...on startup..
-forget bling bling,e.g ...

As if it not enough testing all those...one old cnc gecko g201 stepper motor hardware drive is defective...could not be happier!!!
i can now stop searching parports, wirings,drivers,cnc configuration,etc!!!
and it mean ,its working pretty well!!!
got some very very very decent latency as good,even ...

Hey rockedge,
I am having some booting problems although at this time and must work out the kinks. I used the kernel version from the config file you attached.


config i posted was more for reference, it a usb/img intended iso,i think,so their must be in those ntfs-fat related to it! again, i ...

For who could be interested in the subject of linuxcnc on puppys ,,taught it worth sharing my experiments .
Lets make it clear, dont expect here in any way you could ,as is ,to use the proposed packages/tweaks/ideas/etc in
an "industrial" environment ,safely,no,no,Its all experiments,
everything ...

Hi
Got a request :
because,lets say i am away from a keyboard(yes,could happen here..),with touchscreen not working in prompt or out of x..
i mess it up(yes,it happen here..),i would like to reboot without saving ,pup event manager/save session /option ask to bla bla(if unticked,session will be ...

hey rockedge,
Got ppdev module to compile,well had to compiled the whole char drivers directory,anyhow it work ,thank to google,and you...
So,bionicpup64+rtpreempt+linuxcnc_uspace+spot+hours testing=cnc COMMUNICATE with both parallels ports..more than i expected..
no miracle, first there is ...

hey rockedge,
in the cutting edge here i do have the blade pretty dull..
How do you compile a single kernel module??
/usr/src/linux/drivers/char/ppdev.c
make drivers/char/ppdev.ko
yes ,module is there..
depmod -a
modprobe ppdev
modprobe: FATAL: Module ppdev not found in directory /lib/modules/4 ...

Hi rockedge,
Reading about spot i found old spot script topic where jamesbond http://murga-linux.com/puppy/viewtopic.php?t=86526 which point a few facts,one state; ; If you run a program under spot, then "all-aspects-of-it" will be running under spot. A program that needs to run under multiple ...

Hi rockedge,
Do you mind if ,being dependent of your rtpreempt efforts, i keep the linuxcnc subjet into this topic for a while?

Linuxcnc.pet from binaries +bionicpup64+rtpreempt might get sooner then i expected to a plausible solution simply called ;spot...right before i was tempt "chown'& mess it ...

Hi rockedge,
I am looking forward to a working LinuxCNC on a Bionic64...
me too...
Still studying linuxcnc run-in-place dev-environment which is new to me,it may lead me solving some more problems.
There is a lot more learning steps on my side before a puppy of its own will born!! woof-ce being ...

Hey rockedge,
Step one...it configured finally...
It seems that ./configure completed successfully. #
# This means that RT is properly installed #
No wonder you cant find online the solution i applied to get there!!!
of course make bump in tcl.h... a dozen symlink and it compiled OK
I get the ...

Hi rockedge,
it boot, its fast,faster?
got for one machine to compile input-wacom 0.42 ...peebee latest kernel does to ,i think ,build his now with latest 0.44 which wont enable finger touch on this tablet..
Works now...
Did not read about one success at running linuxcnc uspace on bionic yet ...

Tried at compiling git latest machinekit ,linuxcnc pre 2.8 or 2.9 too..it hang on the same looping /usr/lib//tcl8.6/tclConfig.sh: line 2: dpkg-architecture: command not found... start to think linux is secretly sponsored by coffee corps conglomerate.....

Are these options ;
--prefix=/usr CFLAGS="-mtune=generic -O2 -fomit-frame-pointer" CXXFLAGS=$CFLAGS
still could be applied ,or useful in ¨modern puppy¨?
Tried those too in my learning process..it did not ease the pain...nor changed results.

Hey rockedge
You got to the same stage i did,with the same distro.
Code:
./configure --with-realtime=uspace
is what i used.
Its tclConfing.sh that contain the `dpkg-architecture -qDEB_HOST_MULTIARCH` call. Here it did not segfault,it simply loop the error message.
So,my latest search:reading where ...

Hi rockedge,
Its not a compiling topic...if ever you got a hint on alternative to a

`dpkg-architecture -qDEB_HOST_MULTIARCH` call in configuring?

Compiling is a time consuming pain....you compilers/coders deserve all my sincere gratitude..
Any idea? else then suggesting a degree in software ...

Hey rockedge,
linuxcnc wiki suggest ' If you are running on a realtime-capable system"
to make, make setuid..
I tested here using bionic binaries found as i have had no success compiling it.
To your question;
to be honest, i would say,maybe, i did tried a lot without taking notes ..

I will retry ...

EDIT;forget these... made some progress ...yes in the same pets n' stuff closet
For the sake of plain curiosity...
Testing ,
-Bionicpup64-8.0
-Rockedge kernel 4.19.25 rtpreempt
-linuxcnc-uspace_2.7.14_bionic1_amd64.deb
with dependencies(i think that all it need..)
--------no surprise,it do not ...